Tenda TEF1118P-16-150W | Switch | 10/100MBPS PoE, 2x 10/100/1000MBPS, 1x SFP, 150 W

CODE: TEF1118P-16-150W

Tenda TEF1118P-16-150W | Switch | 10/100MBPS PoE, 2x 10/100/1000MBPS, 1x SFP, 150 W

CODE: TEF1118P-16-150W
130,58 EUR without VAT (net)
Out of stock
Number of LAN ports: 16x [10/100M (RJ45)]
Number of PoE ports: 16x [802.3af/at (100M)]
Number of WAN ports: Not applicable
Show more parameters
Recommended products
Subscribe to the NEWSLETTER and receive 5EUR* for shopping
Save
* Offer valid for orders from 45EUR |Regulation|

Promotions

New products

Discounts

ABOUT PRODUCT

PoE switch TEF118P

The Tenda TEF1118P is an unmanaged PoE switch with 16 10/100 Mbps ports compliant with IEEE 802.3af and EEE 802.at with PoE support. The switch can intelligently identify devices, with a maximum PoE output of 150 W and 30 W per port, and can deliver power while transferring data via access points, IP cameras and IP phones. The switch supports 4 operating modes, including Standard, Priority, Enhanced and VLAN, and has 6kV surge protection. TEF1118P has been designed for small and medium businesses and households.

TEF1118P

SFP port

The switch has been equipped with one SFP 10/100/1000 Mbps port, so that the switch can meet the current demand for Gigabit WLAN capacity and digital HD monitoring. The switch supports maximum transmission distance up to 20 km, in cooperation with Tenda TEG311SM fiber optic module.

TENDA TEF1118P

Cascading with 6 devices can support up to 96 IP cameras

In the number of about 100 terminals available in the network, cascading 6 devices through G1, G2 / SFP2 can reach up to 96 monitoring channels. It supports 300/500W and provides stable video transmission without interruption. If both ends of the devices are connected to the NVR, video can be viewed locally.

TENDA TEF1118P

Many modes of operation

The Tenda TEF1118P-16-150W includes a selection of one of four modes: CCTV / Standard / VLAN / Extend.

  • CCTV mode - Ports 1 to 8 support QoS, it is recommended to use these ports.
  • Standard mode - In this mode the switch works as a classic device, all sweats have auto-negative.
  • VLAN mode - in this mode VLANs are active on each PoE port.
  • Extended mode - PoE port speed from 1 to 8 is 10 mbps, autonegation is active and range to end device is increased to 250 m

TENDA TEF1118P-16-150W

SPECIFICATION

Features / filters
LAN standard Fast Ethernet 10/100Mb/s
Number of LAN ports 16x [10/100M (RJ45)]
Number of PoE ports 16x [802.3af/at (100M)]
Number of WAN ports Not applicable
Numbers of pieces in the package 1-pack
Power (W) 150
Stacking possible No

Technical data:
Standards and protocols IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.3af/at
LED 16 * Link/Act LEDs
1 * G1 LED
1 * G2/SFP2 LED
1 * PoE-MAX LED
1 * Power LED
Interface 16 * 10/100 Mbps Base-TX RJ45 ports (Data/Power)
2 * 10/100/1000 Mbps Base-T RJ45 ports (Date)
1 * 10/100/1000 Mbps Base-X SFP port (Combo)
Transmission mode 5.36 Mpps
Switching 7.2 Gbps
Table of MAC addresses 4K
Input power AC: 100-240V~50/60Hz

FAQ

How many PoE ports does the device have?

The device has available PoE 16 ports.

How many gigabit ports?

The Tenda TEF1118P has two 10/100/1000Base-T ports.

130,58 EUR without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.