EN
The Tenda TEF1218P is an intelligent PoE switch with 16 IEEE 802.3at/af compliant RJ45 ports, providing maximum PoE output of 250W. The switch can be used to power IP cameras and IP phones via CAT5 cable. The Tenda TEF1218P has an intelligent management function and an innovative 250m power supply method that minimizes the difficulty and cost of network entry. The device is dedicated for monitoring or networks for small and medium businesses.
Tenda TEF1218P switch has space for SFP 10/100/1000 Mbps socket, which is capable of meeting the current demand for Gigabit WLAN capacity. The switch with cooperation with Tenda TEG311SM fiber optic module is capable of supporting maximum transmission distance up to 20km.
The complex monitoring environment is often scattered over long distances, with some distances as far as more than 100 m from the terminal to the monitoring centre. The TEF1218-16-250W can handle transmissions over a distance of 250 meters, which saves the project costs with less equipment.
The switch is equipped with 16 RJ45 ports, which comply with IEEE 802af/at standard. The total output power of the PoE switch is 230 W and the distance of a single port is 30 W. The PoE ports can be used to power e.g. IP cameras.
The device is designed to support 6kV lightning protection and PoE port overload protection so that the switch is adequately protected against overvoltages.
The TENDA TEF1218P uses an external web management service to provide a more intuitive and user-friendly interface.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 16x [10/100M (RJ45)] , 2x 10/100/1000BaseTX (RJ45), 1x [1G Combo (RJ45/SFP)], |
Number of PoE ports | 16x [802.3af/at (100M)] |
Management | By web browser |
Power (W) | 250 |
Technical data: | |
LED | 16 * Link/Act LEDs 1 * G1 LED 1 * G2/SFP2 LED 1 * PoE-MAX LED 1 * Power LED 1 * SYS LED |
Standards and protocols | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.1p, IEEE802.1q, IEEE802.1w, IEEE802.3af/at |
Interface | 16 * 10/100 Mbps Base-TX RJ45 ports (Data/Power) 2 * 10/100/1000 Mbps Base-T RJ45 ports (Date) 1 * 10/100/1000 Mbps Base-X SFP port (Combo) |
Transmission mode | 5.36 Mpps |
Switching | 7.2 Gbps |
Table of MAC addresses | 4K |
Lightning protection | ≥6KV |
Input power | AC: 100-240V~50/60Hz |
PoE Supply | Ports 1-16 support IEEE802.3af/at standard 30W output per PoE port 230W output of the total PoE Power |
Power consumption | 250W output power of the whole device |
Dimensions | 440 * 178,8 * 44 mm |
Environment | Operating temperature: 0 ℃ ~ 45 ℃ (32 ℉ ~ 113 ℉) |
PoE management | Overheating protection support for PoE module Support for graphical management of PD device detection |
VLAN | It supports a VLAN port. Supports VLAN 802.1Q |
The number of available PoE ports for the device is 8
The maximum power consumption of PoE is 250W
Tenda TEF1218P has two ports 10/100/1000Base-T