EN
The Tenda TEG1009P-EI is a 9-port Gigabit desktop switch with 8 PoE ports and one WAN port for fast Internet connectivity. LAN ports one through eight support 802.3 af technology, which provides 15.4 watts of power to the connected device. The first four ports operate with 802.3 at technology, which provides up to 30 watts of power.
Data is transmitted over Cat5e twisted pair cables that can be connected to an access point, IP camera or IP phone and transmit both data and power over a single cable. The Tenda TEG1009P-EI switch is 802.3 az compliant, which is designed for improved performance and built-in surge protection to protect your equipment in the event of a lightning strike.
The Tenda TEG1009P-EI switch is easy to connect and configure thanks to its Plug and Play functionality.
Features / filters | |
Number of LAN ports | 8x [10/100/1000M (RJ45)] |
Number of PoE ports | 8x [802.3af/at (1G)] |
10G support | No |
AC input frequency | 50 - 60 |
AC input voltage | 100 - 240 |
Auto MDI/MDI-X | Yes |
Auto-negotiation | Yes |
Basic switching RJ-45 Ethernet ports quantity | 9 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Cable types supported | Cat5, Cat5e |
Certification | FCC, CE, RoHS |
DC input voltage | 51 |
Depth | 103 |
Flow control support | Yes |
Full duplex | Yes |
Harmonized System (HS) code | 85176990 |
Height | 27 |
Housing material | Metal |
Input current | 2.1 |
LED indicators | Activity, Link, PoE, Power |
MAC address auto-aging supported | Yes |
MAC address auto-learning supported | Yes |
MAC address table | 4000 |
Mean time between failures (MTBF) | 50000 |
Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Plug and Play | Yes |
Power (W) | 100 |
Power consumption (max) | 107 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) ports quantity | 8 |
Power over Ethernet (PoE) power per port | 30 |
Product colour | Grey |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Store-and-forward | Yes |
Surge protection | Yes |
Surge protection voltage | 4 |
Switching capacity | 18 |
Switching layer | 2 |
Throughput | 1.488 |
Total Power over Ethernet (PoE) budget | 99 |
Type of case | Desktop |
Wall mountable | Yes |
Width | 235 |
Tenda TEG1009P-EI Hardware Features | |
Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at |
Switching | 18 Gbps |
Capacity | 1.488Mpps |
Dimensions (H × W × D) | 235 mm * 103 mm * 27 mm |
MTBF | ≥50 000 hours (approx. 5 years) |
Indicators | Link/Act, Poe Status, Power, PoE Max |
Interfaces | 8 10/100 / 1000Mbps RJ45 ports (data/PoE) 1 RJ45 10/100/1000Mbps ports (data) (Auto negotiation/Auto mdi / mdix) |
Capacity | Wire-speed forwarding: Support Forwarding mode: Store-forward and cut-through MAC Address Table: 4K |
PoE power supply | Port 1 to Port 8 supports IEEE802.3AT/Af Power (maximum power for each port is 30W), PoE power type is end-span (12 , 36-line pair) |
Input voltage | AC: 100-240V ~ 50/60Hz DC: 51V / 2.1 A; (Power supply output) |
Energy consumption | in full configuration: <107W Power supply: 99W |
Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Certification | FCC, CE, RoHS |
No, the Tenda Switch does not have Wi-Fi wireless networking.