EN
The TEG1105P-4-63W is a 1000Mbps 5- port 4-way PoE switch independently designed by Tenda. It has self-adaptive 5 10/100/1000 Mbps RJ45 ports and supports automatic MDI/MDIX switching on each port and provides fast cable forwarding. Ports 1-4 have PoE function and support the IEEE802.3af/at standard, which automatically detects and identifies power for devices that meet this standard and delivers it through network cables. Network Expansion Mode Support, Enable this power transmission function up to 250 meters distance to meet long distance power supply needs.
Innovative energy-saving technology saves up to 70% power, making it an environmentally friendly solution for your corporate network. In addition, lightning protection up to 6 kV ensures a safe and stable power supply for up to 100,000 hours.
Up to 250m PoE distance allows you to extend your network via Ethernet cable where there is no power line or outlet, but where you want to repair devices such as APs, ip cameras or ip phones, etc. E. You no longer have to worry about complicated wiring and long distances that can occur.
With a forward and reverse switching architecture at up to 1 Gbps, all ports forward and filter packets at full wire speed for maximum throughput. Up to 4 HD IP cameras can be accessed simultaneously. Flow control for full-duplex mode and back pressure for half-duplex mode help reduce traffic speeds and ensure reliable performance of the Tenda TEG1105P.
Hardware features | |
Standards and protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at |
Switching capacity | 10 Gbps |
Throughput | 7.44Mpps |
Dimensions | 100 mm x 100 mm x 26 mm |
Lightning protection | 6kV |
Indicators | Link/Act, PoE Status, Power, PoE Max |
Interfaces | 4 10/100/1000Mbps RJ45 ports (Data/PoE) 1 10/100/1000Mbps RJ45 port (data) (Auto Negotiation/Auto MDI/MDIX) |
Redirection performance with link speed | Supports |
Bandwidth forwarding mode | Passing into memory and passing through |
Capacity MAC Address Table | 2K |
PoE power supply | Port 1 to port 4 support IEEE802.3at/af power standard(maximum power for each port is 30W),PoE power type is end-span(12,36- and 45,78-pair line) |
Input voltage | AC: 100-240V~50/60Hz DC: 51V /1.25A(Power supply output) |
Energy consumption | In full configuration:<63.7W Power:57.8W |
Environment | Operating temperature: 0℃~40℃(32℉~104℉) Storage temperature: -40℃~70℃(-40℉~158℉) Operating humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Single-key mode | VLAN mode: If "vlan mode" is enabled, VLAN isolation is enabled. Ports 1-4 will be isolated accordingly, but they can communicate with Uplink port. Default Mode: If "Default Mode" is enabled, the device acts as a generic switch and all ports support 10/100/1000Mbps auto-negotiation. |
Certification | FCC, CE, RoHS |
Camera power supply operates up to 250 meters and monitors equipment performance in real time
The switch supports IEEE 802.3af/at standard, which automatically detects and identifies IEEE 802.3af/at compliant PoE devices and provides power to them. You do not need to worry about damaging a device that does not need power over PoE, because the switch will detect that the device is not compliant with the 802.3af/at standard and will not provide power to that device.