EN
The power strip is equipped with 5 230V sockets with grounding. Thanks to the Ethernet IP module, it is possible to remotely control the sockets through a built-in web server or SNMP protocol. As the sockets work independently, we can turn on or off the selected device without interrupting the work of other devices connected to the strip.
The strip has been prepared for mounting in a 19" rack, the RJ45 network output and additional sensors are located on the front of the strip so we have easy access to these connectors. The strip has an input for DS18B20 temperature detector operating in 1wire standard. Using an additional splitter you can connect up to 4 sensors. The sockets are protected with 2x10A fuses.
Number of sockets | 5 |
Supply voltage | AC 230V |
1wire | RJ11 support up to 4 sensors |
Ethernet speed | 10Mb |
These are disposable fuses - you have to replace them with new ones when they work.
The strip itself supports 10Mbps and can be connected to any switch that supports it.
Enter the address 192.168.1.100 in the browser address, the default login and password is "admin".