EN
The power strip is equipped with 5 230V sockets with grounding. Thanks to the GSM module it is possible to control the sockets remotely. As the sockets work independently, we can switch on or off the selected device without interrupting the operation of other devices connected to the strip.
The strip has been prepared for mounting in a 19" rack, the output for an external antenna and additional sensors is located on the front of the strip, so we have easy access to these connectors. The strip has an input for DS18B20 temperature detector operating in 1wire standard. Using an additional splitter, up to 4 sensors can be connected. The sockets are protected with 2x10A fuses.
Sockets can be managed via the USB console or via SMS messages authorized by a password.
Number of sockets | 5 |
Supply voltage | AC 230V |
Max power | 2300W |
Security | 2x10A |
1wire | RJ11 support up to 4 sensors |
Dimensions | 45mm x 425mm x 140mm (without handles) |
Weight | 2.6kg |
These are disposable fuses - you have to replace them with new ones when they work.
The device has no simlock - it can be used with any cellular network.
The external antenna has SMA connectors and you can use an additional antenna with this connector.