The projector, manufactured for radio Internet providers, provides power for twisted-pair network cables. It is designed to work with a maximum speed of 1Gbps. The voltage is applied to two pairs of wires according to passive PoE 100Mbps requirements, which makes it compatible with slower LAN versions. Input voltage of the injector is in the range from 12V to 56V and we select it depending on the powered network devices.
The Tinycontrol 5G7A-M allows remote management via LAN, giving you the ability to switch PoE power on/off at each output separately. It is possible to monitor communication with the device and if there is no response, ICMP resets the specific selected output. All management options are realized by the built-in lan controller. This allows us to use analog and digital inputs and relay output, as well as connect an external DS18B20 temperature sensor. The PoE projector is enclosed in a 1U enclosure for rack or DIN rail mounting.
| Features / filters | |
| Type of assembly | Other |
| Number of ports 1Gbps | 5x LAN, 5x LAN+PoE |
| Power supply on veins | 4+, 5+, 7–, 8– |
| Supply voltage | 12 ÷ 56 V DC |
| Power consumption on one PoE port | maximum 1.5 A (recommended up to 1 A) |
| Reverse polarity protection | Yes |
| Output short-circuit protection | YES 1,6 A |
| Operating temperature range | -20 to + 65 °C |
| Dimensions (height x width x length) | 45 x 78 x 170 mm (207 mm with handles) |
| Weight | 590g |
| Datasheet | Download |
The output voltage is the same as the injector input voltage and is identical on all ports.
Mounting on a DIN rail is possible with an optional DIN rail bracket.
