EN
Tinycontrol DC/DC converter is a converter that converts 24V input voltage into three voltage levels 12V, 24V and 48V. This unique feature is very useful when in one place you have several electronic receivers supplied with different voltages. One device can therefore replace several converters giving different output voltages. In addition, you can connect a 12V battery, which will be used as backup power in case of power failure 230V. People using the converter to power network devices via PoE will be pleased with the additional function of increasing the power voltage from 48V to 56V, which compensates the drop in voltage on long cables.
Another feature that distinguishes the product on the market is manageability - the user via LAN or the Internet can remotely monitor currents at 24V and 48V/56V outputs, how the inverter is powered or the battery voltage. It is even possible to disconnect or reset the powered devices in case one of them fails. On the front of the converter there is also a controlled transistor output, which can be used to drive an external relay switching on / off devices with higher power consumption. In addition, a digital input allows you to connect an external DS18B20 temperature sensor, so that you can measure the temperature in any point of the rack.
Lan Controller V2 is a simple, innovative device built into a voltage converter. The small board acts as a web server that presents readings from various sensors and allows remote control of up to 6 outputs. In addition, the Event Config event table feature allows you to program an action to be performed when a selected sensor reading meets a certain condition. A watchdog function is provided for ISPs, pinging up to 6 network devices.
Basic general data | |
Manufacturer | Tinycontrol |
Model | TC KIT-176 |
Type | Inverter LAN Controller V2 |
Inverter | |
Power | 120W |
Supply voltage | 19V-24V |
Entry protection | 6A |
Maximum output current | 24V - 5A 48V - 2.5A 12V - 1.5A |
Max. output current Out T | 1A / 24V |
Battery voltage | 12V |
Battery charging current | 1A |
Battery cut-off voltage | 10.5V |
Dimensions | 45mm x 90mm x 110mm (H x D x L) |
Weight | 490g |
Operating temperature | -20 to 50 °C |
LAN Controller V2 | |
Supply voltage | 9 – 55 V |
Power consumption | 1 W |
Interface | Ethernet 10 Mbit/s |
Relay | 255 V AC, 10 A |
Operating temperature range | From -20°C to 85°C |
Dimensions [mm] | 60 × 68 |
Weight | 50 g |
Datasheet | Download |
The converter gives 3 voltages at the same time - just connect the receiving device to the correct output.
Yes, when mains power is restored the inverter will automatically recharge the battery.
The inverters can be mounted to a rail in a rack or using an optional DIN rail bracket.