Access point from TP-Link CPE operates in 2.4 GHz band, achieving data transfer speeds up to 300 Mbps. TP-Link CPE210 has been designed to provide effective solution for external wireless networks. With its central management system, it is ideal for point-to-point and point-to-multipoint wireless connections. Access point The CPE210 is a great choice for both business and home clients - wherever you need to receive a signal from a distance.
Designed for outdoor applications, the CPE210 has antennas with profit 9 dBi, which allow to increase transmission range and reduce signal interference. Thanks to this, the device provides wireless transmission over long distances, even those whose distance exceeds 5 km. To prevent collisions at such long distances between CPE and other transmitters, the product uses TP-Link MAXtream TDMA technology, which effectively prevents network bandwidth reduction.
A convenience for CPE210 is Pharos Control. This software allows for central management of all devices in the network from one computer. With Pharos Control, activities such as detection of devices, status monitoring, software update and network management can be handled.
| Features / filters | |
| LAN standard | Fast Ethernet 10/100Mb/s |
| Maximum wireless transmission speed | 300 Mb/s |
| Number of LAN ports | 2x 10/100BaseTX (RJ45) |
| Operating frequency | 2.4 GHz |
| Wireless network standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, |
| 2.4 GHz | Yes |
| 5 GHz | No |
| AC input frequency | 50/60 |
| AC input voltage | 100 - 240 |
| Antenna direction type | Directional |
| Antenna gain | Under 10dbi |
| Antenna gain level (max) | 9 |
| Antenna type | Internal |
| Automatic channel scanning | Yes |
| Automatic channel selection | Yes |
| Built-in processor | Yes |
| Cables included | AC |
| Certification | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark CE, FCC, RoHS |
| CPU frequency | 560 MHz |
| Depth | 79 |
| Device type | Client device |
| Dynamic Frequency Selection (DFS) | Yes |
| Ethernet LAN (RJ-45) ports | 2 |
| Flash memory | 8 |
| Frequency band | 2.4 - 2.483 |
| Height | 60 |
| IGMP snooping | Yes |
| Internal memory | 64 |
| International Protection (IP) code | IPX5 |
| LED indicators | Status |
| MAC address filtering | Yes |
| Management platform | Pharos Control |
| Maximum data transfer rate | 300 |
| Maximum outdoor range | 5000 |
| MIMO | Yes |
| MIMO Type | 2x2 |
| Mounting kit | Yes |
| Networking standards | IEEE 802.11b,IEEE 802.11g,IEEE 802.11n |
| Number of products included | 1 |
| Operating relative humidity (H-H) | 10 - 90 |
| Operating temperature (T-T) | -30 - 70 |
| Output current | 0.25 |
| Output voltage | 24 |
| Placement | Pole |
| Polarization | Dual polarization |
| Power over Ethernet (PoE) | Yes |
| Processor architecture | MIPS 74Kc |
| Processor frequency | 560 |
| Processor model | Qualcomm Atheros |
| Product colour | White |
| RAM memory | 64MB |
| Reset button | Yes |
| Security algorithms | AES,TKIP,WPA,WPA-PSK,WPA2,WPA2-PSK |
| Storage relative humidity (H-H) | 5 - 95 |
| Storage temperature (T-T) | -40 - 70 |
| Type of device power supply | Passive PoE |
| VLAN support | Yes |
| Web-based management | Yes |
| Width | 224 |
| Equipment features | |
| Processor | Qualcomm Atheros 560MHz CPU, MIPS 74Kc |
| Memory | 64MB DDR2 RAM, 8MB Flash |
| Ports | 1 shielded 10/100Mbps Ethernet port (LAN0, passive PoE) 1 shielded 10/100Mbps Ethernet port (LAN1, PoE Passthrough)* 1 Grounding terminal 1 Reset button *Only in V1 version |
| Power supply | Passive PoE via LAN0 (+4.5-pin; -7.8-pin) Tension: 16-27VDC |
| Power consumption | Max. 10.5 W Note: when using passive PoE, power consumption may be higher, depending on the cable length. |
| Dimensions (S x G x W) | 224 x 79 x 60 mm |
| Antenna type | Built-in dual-polarized 9dBi 2x2 directional antenna Beam width: 65° (in H plane) / 35° (in E plane) Note: For details, see datasheet. |
| Security | Protection against electrostatic discharge 15KV Lightning protection 6000V |
| Case | Resistant ASA plastic IPX5 waterproofing certificate |
| Wireless transmission characteristics | |
| Wireless standards | IEEE 802.11b/g/n (with Pharos MAXtream enabled) |
| Patented protocols | TDMA mode (with Pharos MAXtream on) |
| Wireless network speed | Up to 300Mbps (40MHz, dynamic) Up to 144.4Mbps (20MHz, dynamic) Up to 72.2Mb/s (10MHz, dynamic) Up to 36.1Mb/s (5MHz, dynamic) |
| Frequency of operation | 2.4~2.483GHz Note: available frequencies may vary depending on the selected region. |
| Receiver sensitivity | - • 802.11b: 11M: -95dBm, 5.5M: -96dBm, 2M: -96dBm, 1M: -96dBm - • 802.11g: 54M: -79dBm, 48M: -80dBm, 36M: -84dBm, 6-24M: -88dBm - • 802.11n: MCS15: -76dBm, MCS14: -78dBm, MCS13: -80dBm, MCS12: -84dBm, MCS11: -87dBm, MCS10: -91dBm, MCS9: -93dBm, MCS8: -96dBm, MCS7: -76dBm, MCS6: -78dBm, MCS5: -80dBm, MCS4: -84dBm, MCS3: -87dBm, MCS2: -91dBm, MCS1: -93dBm, MCS0: -96dBm |
| Transmission power | 27dBm/500mw (possibility to change the power with 1dBm accuracy) Note: The maximum transmission power may vary depending on the selected region. |
| Software functions | |
| Wireless network configuration | Pharos MAXtream TDMA technology Modes 802.11b/g/n Channel width: 5/10/20/40MHz Automatic channel selection Control of transmission power Dynamic frequency selection (DFS) WDS on/off Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP), 64/128/152-bit WEP Enable/disable SSID Broadcasting Multi-SSSID with VLAN tagging (only in AP mode) Distance/ACK Timeout settings Filtering at MAC addresses Advanced Wi-Fi settings: Beacon Interval/ RTS Threshold/ Fragmentation Threshold/ DTIM Interval / AP Isolation/short GI/Multimedia Wi-Fi |
| Management | Device detection and management by Pharos Control Web management via HTTP/HTTPS System Log Agent SNMP(v2c) Ping Watch Dog Dynamic DDNS SSH server |
| System tools | Wireless signal quality indicators: Signal strength/noise/CCQ transmission/processor/memory Monitors: bandwidth/stations/interfaces/ARP/ARP/Routes/WAN/DHCP Spectrum analysis Speed Test Ping Traceroute |
| System optimizations | IGMP Snooping/Proxy optimized for multicast applications Hardware watch dog |
| Features of the PoE adapter | |
| Dimensions (S x G x W) | 110 x 57 x 33.5 mm |
| Ports | 1 earthed power plug 1 shielded 10/100Mbps Ethernet port (power + data) 1 shielded 10/100Mbps Ethernet port (data) |
| Buttons | Remote reset button |
| State of the diodes | Power supply: green |
| Entry | 100-240VAC, 50/60Hz |
| Exit | 24VDC, 0.6A +4, 5-pin; -7, 8-pin (PoE power, range up to 60 meters) |
| Performance | >80% |
| Certificates | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| Other | |
| Certificates | CE, FCC, RoHS, IPX5 |
| Package contents | CPE210 Passive PoE 24V adapter 0.6A Mounting straps Power supply cable Quick Installation Guide |
| System requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™, Windows 10, 8, Windows 7, MAC OS, NetWare, UNIX, Linux. We recommend using the following browsers: Google Chrome, Safari and Firefox. We do not recommend the use of IE browsers. |
| Working environment | Permissible operating temperature: -40℃~70℃ (-40℉~158℉) Permissible storage temperature: -40℃~70℃ (-40℉~158℉) Permissible air humidity: 10%~90%, non-condensing Permissible storage humidity: 5%~95%, non-condensing |
| Operating instructions | Download |
