EN
TP-Link EAP220 is a wireless, Gigabit Ethernet access point operating in N standard. It operates at two frequencies and wireless transmission speed is up to 600 Mbps. Thanks to its modern and unconventional design, the EAP220 will fit into any environment, and the poE power supply will allow installation without the use of additional cables. As a wireless access point TP-Link EAP220 will be a perfect solution for networks of such places as: schools, hotels, university campuses.
Authorization of wireless users via the welcome page is extremely convenient. This method requires the user to take appropriate actions, i.e. to approve the terms of use or to log in to the system in order to gain access to the network. These actions are then verified by a special server or database administrator.
The EAP Controller Software allows simultaneous configuration of the network and management of multiple EAP220 devices. Thanks to its features it guarantees real-time monitoring, graphical analysis of network traffic and simultaneous software updates on many devices.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Maximum wireless transmission speed | 600 Mb/s |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | Dual Band (2.4GHz, 5GHz) |
2.4 GHz | Yes |
5 GHz | Yes |
Antenna direction type | Omni-directional |
Antenna features | Integrated antenna |
Antenna gain | Under 10dbi |
Antenna gain level (max) | 4 |
Antenna type | Integrated |
Antennas quantity | 4 |
Application | Indoor |
Cable lock slot | Yes |
Cable lock slot type | Kensington |
DC-in jack | Yes |
Depth | 180 |
Ethernet LAN (RJ-45) ports | 2 |
Ethernet LAN data rates | 10,100,1000 |
Frequency band | 2.4 - 5 |
Height | 47 |
Internal | No |
LED indicators | Yes |
Management protocols | HTTP, HTTPS, Telnet, SNMP |
Maximum data transfer rate | 600 |
MIMO Type | 2x2 |
Networking standards | IEEE 802.11a,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Power consumption (typical) | 9.6 |
Power over Ethernet (PoE) | Yes |
Product colour | White |
Quality of Service (QoS) support | Yes |
Security algorithms | 64-bit WEP,128-bit WEP,152-bit WEP,WPA,WPA-PSK,WPA2,WPA2-PSK |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Type of device power supply | Power supply, PoE 802.3af/at, |
VLAN support | Yes |
WAN connection | Ethernet (RJ-45) |
Wi-Fi data rate (max) | 300 |
Width | 180 |
Equipment features | |
Ports | 1 Gigabit Ethernet port (RJ-45), supports PoE IEEE802.3af 1 console port |
Buttons | Reset, breaker |
Power supply | PoE or external power supply 12 V DC/1.5 A |
Power consumption | 9,6 W |
Dimensions (S x G x W) | 180 x 180 x 47.5 mm (7.1 x 7.1 x 1.9 inches) |
Antenna type | 4 indoor omnidirectional antennas 4 dBi |
Mounting | Wall/ceiling mounting (included mounting kit) |
Physical security | Kensington locking socket |
Watchdog | Yes |
Wireless transmission characteristics | |
Wireless standards | IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.11a |
Frequency of operation | 2.4 GHz and 5 GHz |
Transmission speed | 11n: up to 300 Mbps (dynamic) 11g: up to 54 Mbps (dynamic) 11b: Up to 11 Mbps (dynamic) |
Receiver sensitivity | 5 GHz 300M: -68 dBm@10%PER 150M: -7 2dBm@10%PER 54M: -73 dBm@10%PER 2.4 GHz 300M: -71 dBm@10% PER 150M: -75 dBm@10% PER 54M: -78 dBm@10% PER 11M: -93 dBm@8% PER 6M: -92 dBm@10% PER 1M: -96 dBm@8% PER |
EIRP | FCC: <26 dBm (2.4 GHz) <20 dBm (5 GHz) CE: <20 dBm |
Wireless transmission functions | Multi-SSSID (do 16 SSID) Wireless Switch Automatic channel selection Control of transmission power Band balancing Schedule Wireless network statistics based on SSID/AP/ Client |
Wireless transmission security | Authentication by means of the welcome page Filtering of MAC addresses Wireless Client Isolation SSID to VLAN mapping Detection of unauthorised APs Support 802.1X 64/128/152-bit encryption WEP/ WPA/ WPA2-Enterprise,WPA-PSK/ WPA2-PSK |
Management | |
EAP Controller software | Yes |
E-mail notifications | Yes |
Diode breaker | Yes |
Access control at MAC addresses | Yes |
SNMP | v1, v2c |
System Log | Local and remote |
Telnet | Yes |
Browser management | HTTP/HTTPS |
Management VLAN | Yes |
Other | |
Certificates | CE, FCC, RoHS |
Package contents | EAP220 Power supply Mounting kit CD Installation instructions |
System requirements | Microsoft Windows XP, Vista, Windows 7, Windows 8 |
Working environment | Operating temperature: 0℃~40℃ (32℉~104℉); Storage temperature: -40℃~70℃ (-40℉~158℉) Operating humidity: 10%~90% non-condensing; Storage temperature: 5%~90% non-condensing |