EN

TP-Link EAP225-Outdoor | Access point | MU-MIMO, AC1200, Dual Band, 1x RJ45 1000Mb/s, Outdoor

CODE: TL-EAP225-OUTDOOR / EAN: 6935364083571

TP-Link EAP225-Outdoor | Access point | MU-MIMO, AC1200, Dual Band, 1x RJ45 1000Mb/s, Outdoor

CODE: TL-EAP225-OUTDOOR / EAN: 6935364083571
89,12 GBP without VAT (net)
Out of stock
Maximum wireless transmission speed: 1200 Mb/s
Number of LAN ports: 1x [100/1000M (RJ45)]
Operating frequency: Dual Band (2.4GHz, 5GHz)
Show more parameters

About product

EAP225-OUTDOOR from TP-Link - the fastest Wi-Fi speeds

EAP225-OUTDOOR is a wireless outdoor access point MU-MIMO, designed for outdoor use. It achieves wireless transmission speeds up to 1200Mbps, with 2x2 MIMO technology. Advanced Mesh technology allows for wireless connections between access points for a wider range, as well as flexibility of equipment placement and comfort of use. And with Seamless Roaming support, video streaming and voice calls are free of interference, even when users move around while doing so.

Intelligent self-organisation and self-repair of calls

EAP Omada devices, with Mesh technology, automatically select the best route for your data transmission to quickly and conveniently extend the range of your wireless network.

If there is a connection problem on one of the devices, the system automatically redirects data to other Omada devices so that you never lose connection.

High-speed WiFi with long range

The EAP225-OUTDOOR access point has a high-power amplifier and a powerful antenna, which, combined with Wave 2 MU-MIMO 802.11ac of the latest generation, provides a huge range in both bands, with speeds reaching 1167 Mb/s.

Smooth roaming

Thanks to seamless 802.11k/802.11v technology, users automatically connect to the access point that provides the best quality of connection at the time. The client will not lose signal even for a moment, which is extremely important when using the interference-sensitive VoIP service or when holding a video conference.

IP65 certification

The EAP225-OUTDOOR access point has a heavy-duty weather-proof housing designed for outdoor use. Thanks to the IP65 certificate obtained by the access point we have a guarantee that our access point will withstand even the harshest weather conditions.

Elegant design and free positioning

A well thought-out design of the access point enclosure makes EAP225-OUTDOOR ideal for both indoor and outdoor use. Moreover, the device can be easily installed on a wall or on a pole, using the included mounting elements, which gives us the freedom to locate the equipment.

Authentication of guests

Access point EAP225-OUTDOOR has many options to authenticate guest access to the network, e.g. SMS, Facebook, Voucher, etc., so we can monitor which user is currently using our network. Moreover, extensive wireless network security protects us from unwanted attacks from outside.

Easy management from the Omada application

Thanks to the intuitive Omada application we can easily configure and monitor the network in real time. Download the free app and set up your devices remotely using your smartphone or tablet from anywhere in the world.

Specification

Features / filters
LAN standard Gigabit Ethernet 10/100/1000 Mb/s
Maximum wireless transmission speed 1200 Mb/s
Number of LAN ports 1x [100/1000M (RJ45)]
Operating frequency Dual Band (2.4GHz, 5GHz)
Wireless network standards IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n,
2.4 GHz Yes
5 GHz Yes
AC adapter included Yes
Airtime Fairness (ATF) Yes
Antenna direction type Omni-directional
Antenna features Detachable antenna
Antenna gain Under 10dbi
Antenna gain level (max) 4
Antenna type Outside, External,
Antennas quantity 2
Application Outdoor
Depth 46
Ethernet LAN (RJ-45) ports 1
Ethernet LAN data rates 10,100,1000
Frequency band 2.4 - 5
Harmonized System (HS) code 85176990
Height 27
Maximum data transfer rate 1200
Maximum data transfer rate (2.4 GHz) 300
Maximum data transfer rate (5 GHz) 867
MIMO Yes
MIMO type Multi User MIMO
MIMO Type MU-MIMO 2x2
Mounting kit Yes
Networking standards IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3u
Number of products included 1
Number of SSID supported 16
Operating relative humidity (H-H) 10 - 90
Operating temperature (T-T) -30 - 70
Output voltage 24
Placement Ceiling, Wall
Power consumption (typical) 10.5
Power over Ethernet (PoE) Yes
Product colour White
Quick start guide Yes
Rate limiting Yes
Reset button Yes
Security algorithms 802.1x RADIUS
Storage relative humidity (H-H) 5 - 90
Storage temperature (T-T) -40 - 70
Syslog Yes
Type of device power supply Passive PoE, PoE 802.3af,
Web-based management Yes
Width 215

Equipment features
Ports 1 Gigabit Ethernet port (RJ-45) (supports PoE 802.3af and passive PoE)
Buttons Reset
Power supply PoE 802.3af and Passive PoE 24V (included PoE power supply)
Power consumption 10,5W
Dimensions (S x G x W) 215 × 46 × 27 mm (without antennas and mounting kit)
403.8 × 90.7 × 55.2 mm (with antennas and mounting kit)
Antenna 2.4GHz: 2 * 3dBi, 5GHz: 2 * 4dBi
Weather-resistant housing IP65
Installation Wall/post mounting (included mounting kit)
Wireless transmission characteristics
Wireless standards IEEE 802.11a/b/g/n/ac
Frequency of operation 2.4GHz, 5GHz
Transmission speed 802.11ac: 5G: 6.5 Mbps to 867Mbps (MCS0-MCS9,NSS = 1 to 2 VHT20/40/80) 2.4G: 78Mbps to 300Mbps (MCS8-MCS9 VHT20/40, NSS=1 to 3)
802.11n: 6.5 Mb/s to 300 Mb/s (MCS0-MCS15, VHT 20/40)
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mb/s
802.11b: 1, 5.5, 11Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mb/s
Wireless transmission functions Multi-SSSID （Do 16 SSID, 8 in each band）
Turning off the wireless network
Automatic channel selection
Control of transmission power
QoS (WMM)
MU-MIMO
Airtime Fairness
Beamforming
Band control
Link load balancing
Capacity control
Reset schedule
Wireless network schedule
Wireless network statistics based on SSID/AP/client
Wireless transmission security Authentication by means of the welcome page
Access control
Filtering of MAC addresses
Wireless client isolation
SSID to VLAN mapping
Detection of unauthorised APs
Support 802.1X
Transmission power CE:<20dBm(2.4GHz,EIRP),<23dBm(5GHz,EIRP)
FCC:<30dBm(2.4GHz, EIRP),<30dBm(5GHz, EIRP)
Management
Omada application Yes
Controller Omada Cloud Yes
Omada Controller software Yes
Access to the cloud Yes
E-mail notifications Yes
Access control at MAC addresses Yes
System Log Yes
SSH Yes
Browser management Yes
Management L3 Yes
Multi-site management Yes
VLAN management Yes
Other
Certificates CE, FCC, RoHS
Package contents EAP225-Outdoor
Passive PoE adapter
Power supply cable
Mounting kit
Quick Installation Guide
Waterproof rubber insert
Waterproof antennas
Working environment Permissible operating temperature: -40℃~70℃ (-40℉~158℉)
Permissible storage temperature: -40℃~70℃ (-40℉~158℉)
Permissible air humidity: 5%~90%, non-condensing
Permissible storage humidity: 5%~90%, non-condensing

Support

Downloads

Datasheet Download
Firmware Download

Faq

How do I log in to the EAP product management page?

1.Plug the EAP to the router using an Ethernet cable and connect wireless devices to the EAP using the default SSID printed on the EAP device label. The default SSID for the EAP is: TP-Link_2.4GHz_XXXXXXXXXX or TP-Link_5GHz_XXXXXXXX.


Note: XXXXXXXX represents the last 6 characters of the MAC EAP address. A password is not required.


2.Start your web browser, enter the address: http://tplinkeap.net in the address bar and press the Enter key. Enter "admin". (lower case) for username and password.


89,12 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
Favorite
You are on page for country / region:
 English (EN)
Please select a different country or region to shop in a language that suits you.