EN
EAP225-Wall is an easy to install wireless, wall mounted access point in a standard installation housing. Its compact size and elegant design make it fit into any interior. Extensive network management will help us to configure the device to our needs. The EAP225-Wall Access Point also has a secure guest network, so that unwanted users will not have access to our local network. The device is powered by PoE 802.3af/802.3at.
Placing the EAP device in each room will guarantee strong network signal and allow guests to use separate wireless networks.
With PoE support in standard 802.3af/802.3at access point EAP225-WALL completely eliminates additional cabling and allows the use of existing Ethernet cables.
The EAP225-WALL Access Point has been designed to make installation as easy as possible for users. It is enough to connect access point TP-Link EAP225-WALL to existing Ethernet cables and place the device in a standard wall-mounted housing compliant with EU standards.
The EAP225-Wall Access Point has three Ethernet PoE output ports, so the device can act as a switch, providing PoE power for wired devices such as IP phones, IP cameras or intercoms.
The design of this access point from TP-Link makes it fit into any environment with its minimalist design. The device will provide great range, and will add variety to your room or office with its elegant appearance.
EAP225-Wall can achieve speeds of even 1200Mb/s. Additionally, the device is equipped with the latest MU-MIMO Wave 2 technology in the 802.11ac standard. Thanks to this solution, the access point can exchange data with many devices at the same time, without overloading or delaying the network.
Omada can provide free access from the cloud to the central management platform. Now you can travel with your network without any restrictions. The device offers a Cloud service without license fees.
Features / filters | |
LAN standard | Fast Ethernet 10/100Mb/s |
Maximum wireless transmission speed | 1200 Mb/s |
Number of LAN ports | 4x 10/100BaseTX (RJ45) |
Operating frequency | Dual Band (2.4GHz, 5GHz) |
Wireless network standards | IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, |
2.4 GHz | Yes |
5 GHz | Yes |
Antenna features | Integrated antenna |
Antenna gain | Under 10dbi |
Antenna gain level (max) | 4 |
Antenna type | Integrated, Internal, |
Antennas quantity | 2 |
Application | Indoor |
Automatic channel selection | Yes |
Certification | FCC, RoHS |
Depth | 86 |
Ethernet LAN (RJ-45) ports | 3 |
Ethernet LAN data rates | 10,100 |
Frequency band | 2.4 - 5 |
Height | 17.6 |
MAC address filtering | Yes |
Maximum data transfer rate | 867 |
Maximum data transfer rate (2.4 GHz) | 300 |
Maximum data transfer rate (5 GHz) | 867 |
MIMO | Yes |
MIMO type | Multi User MIMO |
MIMO Type | MU-MIMO 2x2 |
Mounting kit | Yes |
Networking standards | IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3ac,IEEE 802.3af,IEEE 802.3at |
Number of products included | 1 |
Operating relative humidity (H-H) | 0 - 40 |
Operating temperature (T-T) | 10 - 90 |
Package depth | 117 |
Package height | 33 |
Package weight | 300 |
Package width | 184 |
Placement | Wall |
Power consumption (max) | 25.5 |
Power consumption (typical) | 9 |
Power over Ethernet (PoE) | Yes |
Product colour | White |
Quality of Service (QoS) support | Yes |
Quick start guide | Yes |
Rate limiting | Yes |
Reset button | Yes |
Security algorithms | 64-bit WEP,128-bit WEP,152-bit WEP,WPA,WPA-PSK,WPA2-Enterprise,WPA2-PSK |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Type of device power supply | PoE 802.3af/at |
Web-based management | Yes |
Width | 143 |
Equipment features | |
Ports | Uplink: 1 Ethernet port 10/100Mbps Downlink: 3 10/100Mbps Ethernet ports |
Buttons | Reset |
Power supply | 802.3af/802.3at PoE |
Power consumption | 9 W/25.5 W (including PoE socket) |
Dimensions | 143 × 86 × 19.7mm (5.6 × 3.4 × 0.8 inches) |
Antenna | 2 dual-band antennae 2.4GHz: 2*3dBi 5GHz: 2*4dBi |
Installation | Wall-mounting |
Physical security | Yes |
Hardware Watch Dog | Yes |
Wireless transmission characteristics | |
Wireless standards | IEEE 802.11n/g/b/ac |
Frequency of operation | 2.4GHz and 5GHz |
Transmission speed | 5GHz: Up to 867Mbps 2.4GHz: Up to 300Mbps |
Wireless transmission functions | Multi-SSSID (Do 8 SSID on each band) Turning off the wireless network Automatic channel selection Control of transmission power QoS(WMM) Balancing the band load Speed limit Restart schedule Wireless network schedule Wireless network statistics based on SSID/AP/client |
Wireless transmission security | Authentication by means of the welcome page Access control Filtering of MAC addresses Wireless client isolation SSID to VLAN mapping Detection of unauthorised APs Support 802.1X 64/128/152-bit encryption WEP / WPA / WPA2-Enterprise,WPA-PSK / WPA2-PSK |
Transmission power | CE: ≤20 dBm (2.4 GHz, EIRP) ≤23 dBm (5 GHz, EIRP) FCC: ≤21 dBm (2.4 GHz) ≤21 dBm (5 GHz) |
Management | |
Access to Omada Cloud | Yes |
Omada application | Yes |
Controller Omada Cloud | Yes |
Omada Controller software | Yes |
E-mail notifications | Yes |
Diode breaker | Yes |
Access control at MAC addresses | Yes |
SNMP | v1,v2c |
System Log | Local and remote |
Telnet | Yes |
SSH | Yes |
Browser management | HTTP/HTTPS |
Management L3 | Yes |
Multi-site management | Yes |
VLAN management | Yes |
Other | |
Certificates | CE, FCC, RoHS |
Package contents | Wireless EAP225-Wall wall-mounted access point Installation instructions Fixing screw |
System requirements | Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows 10 |
Working environment | Operating temperature: 0℃~40℃ (32℉~104℉); Storage temperature: -40℃~70℃ (-40℉~158℉) Operating air humidity: 10%~90% non-condensing; Storage temperature: 5%~90% non-condensing |