T2600G-28TS is a managed gigabit switch, equipped with 24 ports 10/100/1000 Mb/s, with automatic call negotiation and automatic crossover Auto-MDI/MDIX. Additionally, the device has 4 SFP 1000Mb/s ports and one Micro-USB port. The switch provides high performance, advanced QoS function support, protection strategies and network management functions in layer 2 and 2+. Additionally, it supports network traffic management functions and protects the network against threats. The IP-MAC-Port binding and access control lists (ACL, L2 to L4) protect the network against threats such as broadcast storm, ARP and DoS (Denial-of-Service) attacks. The Quality of Service (QoS, L2 to L4) function provides the ability to direct network traffic while ensuring smooth and faster data transmission.
A secure network
Functions such as IP-MAC-Port binding, port protection, Storm Control and DHCP Snooping, effectively protect against ARP attacks, broadcast storm etc. Typical DoS attacks can be defined to be detected by the T2600G-28TS. This makes protection against them more effective than ever before. The use of access control lists (ACL, L2 to L4) prevents access to certain network resources; denial of packets can be set for specific source or destination MAC addresses, IP addresses, TCP/UDP ports and even VLAN identifiers. In addition, the switch uses 802.1X encryption in combination with RADIUS/Tacacs+ server functions to authenticate users wishing to access the network.
ISP features and IPv6 support
T2600G-28TS supports many ISP functions, such as OAM standard 802.3ah, DDM, sFlow, QinQ, L2PT PPPoE ID Insertion, IGMP authentication, etc. OAM function
802.3ah standard and Device Liaison Detection Protocol (DLDP) provides easier network surveillance and management and faster troubleshooting
with an Ethernet network. In addition, the DDM (Digital Diagnostic Monitoring) function allows monitoring the status of SFP modules and configuring alarm, warning, temperature threshold, voltage threshold, polarity threshold, power threshold Tx and Rx. In addition, the switch supports many IPv6 features such as Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 interface, PMTU Discovery and IPv6 Neighbor Discovery. This ensures that the introduction of next-generation networks (NGNs) will not involve replacing the switch with a new one.
Layer 2 and 2+ functions
Switch T2600G-28TS uses layer 2 switch functions such as VLAN tagging, Port Mirroring, SFP/RSTP/MSTP, LACP and data flow functions. In addition, the switch supports advanced network security features such as feedback loop detection, cable diagnostics, and IGMP Snooping.
Easy to operate
The T2600G-28TS switch is easy to use and manage. The device can be managed in various ways, e.g. through an intuitive graphical user interface in a web browser (GUI) or a command line interface (CLI). The transfer of packages can be protected with SSL or SSH encryption. Support for SNMP (1/2/3) and RMON protocols allows the switch to transmit relevant status information and capture unexpected events.
24 RJ45 ports 10/100/1000Mbps Automatic negotiation of connection speeds and automatic crossover (Auto-MDI/MDIX) 4 SFP ports 1000Mbps 1 RJ45 console port 1 Micro-USB console port
10BASE-T: Cat 3, 4 or 5 UTP cable (up to 100m) 100BASE-TX/1000Base-T: Cat 5, 5e or higher UTP cable up to 100m 1000BASE-X: MMF, SMF
Dimensions (S x G x W)
440*220*44 mm (17.32*8.7*1.73 inches)
For mounting in a cabinet
Max. energy consumption
Amount of heat generated
Packet forwarding rate
MAC address table
Quality of Service function
Prioritization of CoS/DSCP traffic based on the IEEE 802.1p standard 8 queues Setting the queue of priorities: SP, WRR, SP+WRR Limitation of transmission depending on port, data flow Voice VLAN
L2 and L2+ functions
Static routing DHCP Relay IGMP Snooping V1/V2/V3 LACP support (according to 802.3ad standard (up to 8 groups, maximum 8 ports per group) Spanning Tree STP/RSTP/MSTP BPDU filtering/protection TC/Root Protect Feedback loop detection Data flow control (802.3x) L2PT
IEEE802.1Q support, up to 4000 VLAN and 4000 VLAN identifiers 802.1Q/MAC/Protocol/Private VLAN GARP/GVRP
Access control lists
Packet filtering based on source and destination MAC addresses L2～L4 IP address, TCP/UDP ports, 802.1p, DSCP, protocol and VLAN ID Limited in time
IP-MAC-Port-VID binding AAA Authentication based on IEEE 802.1X standard, Radius Protection against DoS attacks Dynamic protection against ARP (DAI) attacks SSH v1/v2 SSL v2/v3/TLSv1 Port security Broadcast/Multicast/Unknown-unicast Storm Control
Dual IPv4/IPv6 stack MLD Snooping IPv6 ND MTU detection ICMPv6 TCPv6/UDPv6 IPv6 access control list DHCPv6 Snooping IPv6 interface
GUI browser interface, CLI command line interface SNMP v1/v2c/v3, compatible with TP-LINK public and private MIB libraries RMON (groups 1, 2, 3, 9) sFlow PPPoE Circuit ID DHCP Relay DHCP server Customer DHCP/BOOTP, DHCP Snooping, DHCP Option82 Dual Image CPU monitoring Port Mirroring SNTP time synchronization Firmware update: via TFTP protocol and web browser Diagnostics: VCT test System logos, MIB public libraries Password recovery
CE, FCC, RoHS
The switch; Power cable; Quick Installation Guide; CD; Mounting elements (for mounting in racks); Rubber coasters
Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8, MAC® OS, NetWare®, UNIX® or Linux.