EN
The TP-Link TD-W9960 ADSL2+ router has impressive design. The main task of the router is to organize Internet access using the resources of a DSL line. Support of VDSL2 standard enables the device to guarantee incoming speeds up to 100 Mbps. The same speed is provided by WAN port connected to one of four LAN ports.
The TP-Link TD-W9960 ADSL2+ router supports 802.11b, 802.11g, and 802.11n standards. The wireless link is provided by two external antennas. The used band is 2.4 GHz. The router is characterized by long range: the device is capable of providing high level of wireless signal in a large apartment or house.
The router can operate in temperature range from 0 to 40 °C. The device is designed for indoor operation. The router is supplied with power supply unit, documentation, Ethernet cable and telephone cable.
Features / filters | |
Wireless network standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, |
3G | No |
3G/4G USB modem compatibility | No |
4G | No |
AC adapter included | Yes |
ADSL | Yes |
Antenna gain level (max) | 5 |
Antenna type | External |
Antennas quantity | 2 |
Cables included | LAN (RJ-45), Phone (RJ-11) |
Cabling technology | 10/100Base-T(X) |
Certification | CE, RoHS |
DC-in jack | Yes |
Depth | 125.7 |
DMZ support | Yes |
DSL WAN | Yes |
Dynamic DNS (DDNS) | Yes |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 4 |
Ethernet LAN data rates | 10,100 |
Ethernet LAN interface type | Fast Ethernet |
Ethernet WAN | Yes |
Filtering | Yes |
Firewall | Yes |
Firmware upgradeable | Yes |
Height | 36.2 |
LED indicators | LAN, Status, WLAN |
Linux operating systems supported | Yes |
MAC address filtering | Yes |
Mac compatibility | Yes |
Memory card slot(s) | No |
Mobile network generation | 4G |
Network address translation (NAT) | Yes |
Networking standards | IEEE 802.3u |
On/off switch | Yes |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Output current | 0.6 |
Output voltage | 9 |
Package depth | 232 |
Package height | 70 |
Package weight | 490 |
Package width | 285 |
Power source type | DC |
Product colour | White |
Product type | Tabletop router |
Quality of Service (QoS) support | Yes |
Quick start guide | Yes |
Reset button | Yes |
RJ-11 ports quantity | 1 |
Security algorithms | 64-bit WEP,128-bit WEP,WPA,WPA-PSK,WPA2 |
SIM card slot | No |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Supported network protocols | IPv4, IPv6 |
Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
Universal Plug and Play (UPnP) | Yes |
USB port | No |
VDSL2 | Yes |
VPN Passthrough | Yes |
Wall mountable | Yes |
WAN connection type | RJ-45 |
Wi-Fi band | Single-band (2.4 GHz) |
Wi-Fi standards | 802.11b,802.11g,Wi-Fi 4 (802.11n) |
Width | 181.6 |
Windows operating systems supported | Windows 10,Windows 2000,Windows 7,Windows 8,Windows 8.1,Windows 98SE,Windows NT,Windows XP Home,Windows XP Professional |
WLAN data transfer rate (max) | 300 |
WPS push button | Yes |
Technical data: | |
Ports | 1 port 10/100Mbps LAN/WAN 3 10/100Mbps LAN ports 1 port RJ11 |
Buttons | WPS button Reset button Power on/off button |
Antenna | 2 × 5dBi fixed omni-directional antennas |
External power supply | 9V/0.6A |
Dimensions (W x D x H) | 181.6 mm × 125.7 mm × 36.2 mm (7.2 × 4.9 × 1.4 in.) |
IEEE Standards | IEEE 802.3, 802.3u |
ADSL standards | Full Speed ANSI T1.413 Issue 2, ITU-T G.992.1(G.DMT), ITU-T G.994.1 (G.hs), ITU-T G.995.1 |
ADSL2 standards | ITU-T G.992.3 (G.DMT.bis) |
ADSL2+ standards | ITU-T G.992.5 |
VDSL2 standards | ITU-T G.993.2, ITU-T G.993.5 (G.vector), ITU-TG.998.4 (G.INP) |
Wireless | |
Wireless standards | IEEE 802.11b, 802.11g, 802.11n |
Frequency: | 2.400 - 2.4835GHz |
Signal speed | 300Mbps at 2.4GHz |
Transmission power | <20dBm(EIRP) |
Wireless function | Wireless radio on/off, WDS bridge, WMM, wireless network statistics |
Wireless network security | Supports 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryption |
Software | |
Operating modes | DSL Modem Router, Wireless Router |
DHCP | Server, Client, DHCP Client List, Address Reservation, DHCP Forwarding |
Quality of service | WMM, bandwidth control (IP QoS) |
NAT Forwarding | Virtual Server, Port Triggering, UPnP, DMZ, ALG |
Dynamic DNS | DynDns, NO-IP |
VPN Pass-Through | PPTP, L2TP, IPSec Pass-through |
ATM/PPP protocols | ATM Forum UNI3.1/4.0, PPP over ATM (RFC 2364), PPPover Ethernet (RFC2516), IPoA (RFC1577/2225), PVC - up to 8 PVC |
Security | NAT Firewall, SPI Firewall, DoS protection, IP & MAC Binding, Service Filtering, Access Control, Parental Control |
Management | Remote management, Telnet management, command line interface, SSL for TR-069, SNMP V1/V2C, firmware update via WWW, CWMP (TR-069), diagnostic tools. |
Guest network | 2.4 GHz guest network |
IPSec VPN | Supports up to 10 IPSec VPN tunnels |
Protocols | Supports IPv4 and IPv6 |
Other | |
Certification | CE, RoHS |
System requirements | Windows 10/8.1/8/7/Vista/XP or Mac OS or Linux-based operating system |
Environment | Operating temperature: 0℃~40℃ (32℉ ~104℉) Storage temperature: -40℃~70℃ (-40℉ ~158℉) Operating humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
Contents of the package | DSL Modem Router TD-W9960 External DSL Splitter RJ11 DSL cable RJ45 Ethernet Cable Quick Installation Guide Power adapter |
1. If your computer is set to a static IP address, change its settings to obtain an IP address automatically.
2. make sure that http://tplinkmodem.net or http://192.168.1.1 is correctly entered in your web browser.
3. Use a different web browser and try again.
4. Reboot the router with the modem and try again.
5. turn the network adapter you are using off and then on.
When the modem is on, press and hold the RESET button on the modem until all the LEDs light up momentarily, then release the button.
Log in to the modem management site. Go to Advanced > System Tools > Backup and Restore, and then click Restore Factory Settings. The router will automatically restore and reboot.