EN
The TLSG1005LP has 5 10/100/1000 Mbps RJ45 ports that require no configuration.
4 ports support PoE (Power over Ethernet ) function. The switch automatically detects IEEE 802.3af devices and supplies them with power. Thanks to this solution, we can place access points, IP cameras, IP phones everywhere, where there is no access to power sockets.
The switch is equipped with port prioritization feature that protects the system in moments of overload. Power consumption of PoE powered devices is up to 40 W. Devices connected to ports with higher priority are powered first.
TL-SG1005LP switch is easy to install and use, requiring no configuration or installation. With four PoE ports, ease of use and reliability, this switch is the ideal solution for expanding your home or office network.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 5x 10/100/1000BaseTX (RJ45) |
Number of PoE ports | 4x [802.3af/at (1G)] |
10G support | No |
AC input frequency | 50/60 |
AC input voltage | 100 - 240 |
Auto MDI/MDI-X | Yes |
Auto-negotiation | Yes |
Basic switching RJ-45 Ethernet ports quantity | 5 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Cable types supported | Cat3,Cat4,Cat5,Cat5e,Cat6 |
Certification | FCC, CE, RoHS |
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
Depth | 98 |
Fanless | Yes |
Flow control support | Yes |
Forwarding rate | 7.44 |
Harmonized System (HS) code | 85176990 |
Heat dissipation | 161.98 |
Height | 25 |
IGMP snooping | Yes |
Jumbo frames | 16000 |
Jumbo frames support | Yes |
LED indicators | Yes |
MAC address auto-aging supported | Yes |
MAC address auto-learning supported | Yes |
MAC address table | 2000 |
Networking standards | IEEE 802.1p,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Power (W) | 40 |
Power consumption (max) | 47.5 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) ports quantity | 4 |
Power over Ethernet plus (PoE+) ports quantity | 4 |
Power supply included | Yes |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Rack mounting | No |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Store-and-forward | Yes |
Switch type | Unmanaged |
Switching capacity | 10 |
Total Power over Ethernet (PoE) budget | 40 |
Type of case | Metal |
User guide | Yes |
Wall mountable | Yes |
Width | 99.8 |
Hardware features | |
Ports | 5 RJ45 10/100/1000Mbps ports Auto-negotiation of connection speed Automatic crossover (Auto-MDI/MDIX) |
Network cabling | 10BASE-T: UTP cat. 3, 4, 5 cables (max. 100m) EIA/TIA-568 100Ω STP (up to 100m) 100BASE-TX: Category 5, 5e UTP cables (up to 100m) EIA/TIA-568 100Ω STP (up to 100m) 1000BASE-T: UTP Cat. 5, 5e, 6 or higher cables (up to 100m) EIA/TIA-568 100Ω STP (up to 100m) |
Fanless | Yes |
Power supply | External power supply (output: 53.5 VDC / 0.81 A) |
Packet forwarding rate | 7.44 Mpps |
PoE ports (RJ45) | Standard: 802.3 af/at PoE Ports: Ports 1- 4 PoE power output: 40W |
MAC Address Table | 2K |
Jumbo frames | 16 KB |
Switching capacity | 10 Gbps |
Dimensions (H x W x D) | 99.8 mm × 98 mm × 25 mm (3.9×3.9×1.0 inches) |
Max. power consumption | 4.12 W (220V/50Hz with no PD connected) 47.5 W (220V/50Hz with 40 W PD connected) |
Amount of heat generated | 14.05 BTU/h (without PD connected) 161.98 BTU/h (with 40 W PD connected) |
Software functions | |
Advanced features | Compatible with IEEE 802.3af/at PoE-powered devices (PDs) Automatic memorization and expiration of Mac addresses EEE802.3x flow control 802.1p/DSCP QoS IGMP Snooping |
Transmission method | Store-And-Forward |
Other | |
Certificates | FCC, CE, RoHS |
Contents of the package | TL-SG1005LP Power Supply Installation Manual |
Work environment | Permissible operating temperature: 0℃~40℃ (32℉~104℉); Permissible storage temperature: -40℃~70℃ (-40℉~158℉); Permissible air humidity: 10%~90%, non-condensing Permissible storage humidity: 5%~90%, non-condensing |
When the total power consumption of the connected PoE devices exceeds the maximum, the PoE port with smaller port number has higher priority. The system will cut off power to the ports with higher port numbers to provide power to other ports. An example is the TL-SG1005P. If ports 1, 2 and 4 consume 15.4 watts respectively, and an additional PoE device of 19 watts is inserted into port 3, the system will cut off power to port 4 to compensate for the overload.