EN
The TL-SG1008P desktop switch has 8 RJ45 Gigabit Ethernet (1000 Mb/s) and Fast Ethernet (100 Mb/s) ports. Four ports provide Power over Ethernet, which automatically detects 802.3af compliant devices and supplies them with power. Power and data are transmitted via the Ethernet cable. This solution allows you to connect devices such as access points, cameras or IP phones in places where there is no access to power from the socket. The switch is also equipped with overload prevention system and port priority.
TL-SG1008P switches have a port priority function to protect the system from system overload. If the sum of power consumed by devices connected to the switch exceeds 53 W, the system will disconnect power to the lowest priority port. Port priorities are set on principle 1>2>3>4, where the first port is the highest priority and the fourth the lowest.
The TL-SG1008P switch is easy to install and use. No pre-configuration required. With its high performance and reliability, the TL-SG1008P 8-port PoE Gigabit switch with 4 PoE ports is the ideal solution for expanding your home or office network.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 8x [10/100/1000M (RJ45)] |
Number of PoE ports | 4x [802.3af/at (1G)] |
10G support | No |
Auto MDI/MDI-X | Yes |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Cables included | AC |
Certification | CE, FCC, RoHS |
Copper ethernet cabling technology | 1000BASE-T,100BASE-TX,10BASE-T |
DC input voltage | 48 |
Depth | 98 |
Flow control support | Yes |
Full duplex | Yes |
Gigabit Ethernet (copper) ports quantity | 8 |
Height | 27 |
Input current | 1.25 |
LED indicators | Status |
MAC address table | 4000 |
Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3u,IEEE 802.3x |
Number of power supply units | 1 |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Package depth | 223 |
Package height | 68 |
Package type | Box |
Package width | 280 |
Power (W) | 50 |
Power connector | DC-in jack |
Power consumption (typical) | 53 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) ports quantity | 4 |
Power supply included | Yes |
Product colour | Grey |
Rack mounting | No |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Store-and-forward | Yes |
Switching capacity | 16 |
Switching layer | 2 |
Type of case | Desktop |
User guide | Yes |
Width | 171 |
Equipment features | |
Ports | 8 RJ45 ports 10/100/1000 Mb/s Automatic negotiation of connection speeds and automatic crossover (Auto-MDI/MDIX) |
Network cabling | 10BASE-T: Cat 3, 4 or 5 UTP cable (up to 100 m) STP EIA/TIA-568 cable 100 Ω (up to 100 m) 100BASE-TX: Cat 5 or 5e UTP cable (up to 100 m) STP EIA/TIA-568 cable 100 Ω (up to 100 m) 1000BASE-TX: UTP cable cat 5, 5e, 6 or higher (up to 100 m) STP EIA/TIA-568 cable 100 Ω (up to 100 m) |
Fanless | Yes |
Power consumption | Maximum (PoE on): 65.2 W (220 V/50 Hz) Maximum (PoE off): 5.5 W (220 V/50 Hz) |
Power supply | External power supply (output: 48 V DC/1.25 A) |
PoE ports (RJ45) | Standard: 802.3 af PoE ports: port 1-port 4 Total PoE power: 55 W |
Main bandwidth | 16 Gb/s |
MAC address plate | 4 K |
Dimensions (S x G x W) | 171 x 98 x 27 mm (6.7 x 3.9 x 1.1 inch) |
Max. energy consumption | 5.49 W (220/50 Hz. no PD connected) 65.24 W (220/50 Hz. with 55 W PD connected) |
Amount of heat generated | 18.73 BTU/h (no PD connected) 222.60 BTU/h (with 55 W PD connected) |
Software functions | |
Method of transmission | Store-and-Forward |
Advanced features | Compatible with IEEE 802.3af PoE devices Prioritisation of ports Automatic MAC address saving and blanking IEEE802.3x flow control for full duplex, backpressure function for half duplex |
Other | |
Certificates | FCC, CE, RoHS |
Package contents | TL-SG1008P, power supply, user manual |
Power consumption | 5.8 W (without connected PoE devices) 58.8 W (maximum, with PoE devices connected) |
Working environment | Operating temperature: 0℃~40℃ (32℉~104℉) Storage temperature: -40℃~70℃ (-40℉~158℉) Operating humidity: 10%~90%, non-condensing Storage humidity: 5%~90%, non-condensing |
Installation guide | Download |