EN
TP-Link TLSG1016PE is a Gigabit 10/100/1000 Mb/s switch equipped with 16 ports, 8 of which have PoE+ power supply to connect to the network and power the devices with one Ethernet cable. The 110 W switch (up to 30 W per port) can power IEEE 802.3af/at devices such as wireless access points (APs), IP cameras or IP phones. The TL-SG1016PE switch based on innovative, energy-saving technology allows to reduce energy consumption by up to 75%.
8 switch ports (1-8) have PoE+ function, which allows automatic detection and power supply of IEEE 802.3af/at compliant PoE devices. This solution allows you to transfer data and power to devices using a single Ethernet cable. It is possible to operate wireless access points, IP cameras and IP phones in places where there is no access to a network socket.
The TL-SG1016PE has a port priority function, extremely important when PoE power budget is exceeded. If the power consumption of all ports is greater than 110 W, then the lowest priority port loses power and other devices can continue to operate.
The TL-SG1016PE does not require installation or configuration. It is easy to use and its small size saves space, so it is an ideal choice for a small office or home. The switch also has a automatically crossed MDI/MDIX function, thanks to which there is no need to use crossed cables.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 16x [10/100/1000M (RJ45)] |
Number of PoE ports | 8x [802.3af/at (1G)] |
Number of WAN ports | Not applicable |
10G support | No |
AC input frequency | 50 - 60 |
AC input voltage | 100 - 240 |
Auto MDI/MDI-X | Yes |
Auto-negotiation | Yes |
Basic switching RJ-45 Ethernet ports quantity | 16 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Broadcast storm control | Yes |
Built-in modem | None |
Cable types supported | Cat3,Cat4,Cat5,Cat5e,Cat6 |
Cables included | AC |
Certification | FCC, CE, RoHS |
Compatible operating systems | Windows |
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
Depth | 180 |
Flow control support | Yes |
Full duplex | Yes |
Gigabit Ethernet (copper) ports quantity | 16 |
Height | 44 |
IGMP snooping | Yes |
Jumbo frames | 10000 |
Jumbo frames support | Yes |
LED indicators | Yes |
Link aggregation | Yes |
Loop protection | Yes |
MAC address table | 8000 |
Management | Yes |
Networking standards | IEEE 802.1Q,IEEE 802.1p,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x |
Number of fans | 1 |
Number of queues | 4 |
Number of VLANs | 4000 |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Package depth | 250 |
Package height | 80 |
Package width | 400 |
Port mirroring | Yes |
Power (W) | 110 |
Power consumption (max) | 124.4 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) power per port | 30 |
Power over Ethernet plus (PoE+) ports quantity | 8 |
Power supply included | Yes |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Rack mount kit | Yes |
Rack mounting | Yes |
Rate limiting | Yes |
Resource CD | Yes |
Stackable | No |
Static port security | Yes |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Store-and-forward | Yes |
Switch type | Managed |
Switching capacity | 32 |
Switching layer | 2 |
Throughput | 23.8 |
Total Power over Ethernet (PoE) budget | 110 |
Type of case | Desktop |
Virtual LAN features | Tagged VLAN,Port-based VLAN |
VLAN support | Yes |
Web-based management | Yes |
Width | 294 |
Equipment features | |
Standards and protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p |
Ports | 16 RJ45 ports 10/100/1000 Mb/s, autonegotiation/AUTO-MDI/MDIX |
Network cabling | 10BASE-T: Cat 3, 4, 5 UTP cables (max. 100 m) EIA/TIA-568 100 Ω STP (max. 100 m) 100BASE-TX: Cat 5, 5e UTP cables (max. 100 m) EIA/TIA-568 100 Ω STP (max. 100 m) 1000BASE-T: UTP cables cat 5, 5e, 6 or higher (max. 100 m) EIA/TIA-568 100 Ω STP (max. 100 m) |
Fanless | No. The unit has 1 fan |
Power supply | 100-240 V AC, 50/60 Hz |
Power consumption | Max.124.4 W (220 V/50 Hz) |
PoE ports (RJ45) | Standard: 802.3 at PoE ports: ports 1-8 PoE energy expenditure: 110 W |
Dimensions (S x G x W) | 294 x 180 x 44 mm (11.6 x 7.1 x 1.7 inches) |
Installation | For mounting in a cabinet |
Max. energy consumption | 14.72 W (110 V/60 Hz without connected PD) 131.42 W (110 V/60 Hz with PD 110 W connected) |
Amount of heat generated | 50.22 BTU/h (without PD connected) 448.41 BTU/h (with PD 110 W connected) |
Switching efficiency | 32 Gb/s |
Speed of packet redirection | 23.8 Mp/s |
MAC address plate | 8 K |
Package buffer | 4.1 Mb |
Jumbo frames | 9 KB |
Software functions | |
Quality of Service function | Port/queuing based priority support 802.1p/DSCP Handling 4 priority queues The transmission speed limiting function for each port Storm Control function |
Features of the layer 2 switch | IGMP Snooping V1/V2/V3 Aggregation of connections Port Mirroring Cable condition diagnostics Prevention of loops |
VLANs | Simultaneous support of up to 32 VLANs (with 4,000 VLAN tags) MTU/Port/Tag VLAN |
Management | GUI web interface Easy Smart Configuration Utility |
Method of transmission | Store-And-Forward |
Other | |
Certificates | FCC, CE, RoHS |
Package contents | TL-SG1016PE Power Cable Operating instructions CD Rubber feet Mounting elements |
System requirements | Microsoft® Windows® |
Working environment | Permissible operating temperature: 0℃~40℃ (32℉~104℉) Permissible storage temperature: -40℃~70℃ (-40℉~158℉) Permissible air humidity: 10%~90%, non-condensing Permissible storage humidity: 5%~90%, non-condensing |
User manual | Download |
Network switch, or switch, is the hardware used to connect segments of a computer network working in the second layer of the ISO/OSI (data links) model. It is a device necessary for proper and smooth network operation.