EN
The TL-SG1210MPE switch is fully compatible with PoE devices such as IP cameras, access points, IP phones. It also works with wired devices without PoE, such as computers, printers, and IPTV.
A PoE budget of 30 watts per port and a total budget of 123 watts opens up a wide range of possibilities for video surveillance, offices, dorms and small businesses. The TL-SG1210MPE switch is also fully compatible with IP cameras, access points, IP phones, computers, printers and other devices.
The TL-SG1210MPE router's network interface and management tool allow it to perform many useful tasks, such as network monitoring, network traffic prioritization and enhanced QoS.
The internal components of the TL-SG1210MPE will last a long time thanks to its high-quality metal housing. The TL-SG1210MPE switch has undergone a series of rigorous reliability tests, so you can rely on it.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 9x [10/100/1000M (RJ45)], 1x [1G Combo (RJ45/SFP)], |
Number of PoE ports | 8x [802.3af/at (1G)] |
10G support | No |
Basic switching RJ-45 Ethernet ports quantity | 9 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Broadcast storm control | Yes |
DC input voltage | 53.5 |
Depth | 126 |
Fiber optic connector | SFP |
Fiber ports quantity | 1 |
Forwarding rate | 14.88 |
Harmonized System (HS) code | 85176990 |
Height | 26 |
IGMP snooping | Yes |
Input current | 2.43 |
Jumbo frames | 16 |
Jumbo frames support | Yes |
LED indicators | Yes |
Loop protection | Yes |
MAC address table | 4000 |
Management | No |
Manual | Yes |
Networking standards | IEEE 802.1Q,IEEE 802.1p,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Port mirroring | Yes |
Power (W) | 123 |
Power connector | DC-in jack |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) power per port | 30 |
Power over Ethernet plus (PoE+) ports quantity | 8 |
Power supply included | Yes |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Rack mounting | Yes |
Rate limiting | Yes |
Storage relative humidity (H-H) | 5 - 95 |
Storage temperature (T-T) | -40 - 70 |
Store-and-forward | Yes |
Switch layer | L2 |
Switch type | Managed |
Switching capacity | 20 |
Type of case | Metal, Desktop, |
Width | 209 |
Technical data | |
Standards and protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, IEEE 802.3at, IEEE 802.3z |
Ports | 9 10/100/1000 Mbps RJ45 Ports 1 Port 1000 Mbps Combo SFP/RJ45 AUTO NEGOTIATION AUTO MDI/MDIX |
Network cabling | 10BASE-T: UTP cat. 3, 4, 5 cables (max. 100m) EIA/TIA-568 100Ω STP (max. 100m) 100BASE-TX: UTP cat. 5, 5e cables (max. 100m) EIA/TIA-568 100Ω STP (max. 100m) 1000BASE-T: UTP cat. 5, 5e, 6 or higher cables (max. 100m) EIA/TIA-568 100Ω STP (max. 100m) |
Fanless | Yes |
Power supply | External power supply (53.5V DC / 2.43A) |
PoE ports (RJ45) | Compatible with 802.3af/at standards PoE ports: 1-8 Total PoE power supply: 123 W |
Dimensions (S x G x W) | 209 × 126 × 26 mm |
Max. energy consumption | 7.66 W (220 V/50 Hz, with no PoE devices connected) 141.54 W (220 V/50 Hz, with 123 W PoE devices connected) |
Amount of heat generated | 26.12 BTU/h (without connected PoE devices) 482.65 BTU/h (with 123 W PoE devices connected) |
Performance | |
Switching performance | 20 Gbps |
Packet forwarding rate | 14.88 Mpps |
MAC address table | 4 K |
Jumbo frames | 16 KB |
Software functions | |
Quality of Service Function | Support for port prioritization based on 802.1p/DSCP Supports 4 prioritization queues Rate limiting function Storm Control function |
Layer 2 Switch Features | IGMP Snooping V1/V2/V3 Static aggregation of connections Port Mirroring Cable health diagnostics Loop prevention |
VLANs | Simultaneous support of up to 32 VLANs (with 4K VLAN IDs) MTU/Port/Tag VLAN |
PoE | Extend mode PoE Auto Recovery |
Management | GUI interface Easy Smart Configuration Utility |
Transmission method | Store-And-Forward |
Other | |
Certificates | FCC, CE, RoHS |
Package contents | TL-SG1210MPE Power Supply Installation Manual Rubber feet |
System requirements | Microsoft® Windows® to run the configuration tool |
Work environment | Permissible operating temperature: 0℃~40℃ (32℉~104℉) Permissible storage temperature: -40℃~70℃ (-40℉~158℉) Permissible air humidity: 10%~90%, no condensation Permissible Storage Humidity 5%~90%, non-condensing |