EN
The TP-Link TL-SG1210P Active Switch will easily connect up to 9 10/100/1000 Mbps capable devices to a 20 Gbps local network. The switch comes with multiple configuration options - up to 4000 MAC addresses can be configured.
1-8 ports on the switch support Power Over Ethernet (PoE). These PoE ports can automatically detect and power IEEE 802.3 af/at devices. To protect the device from overload, when the total power consumption is more than the maximum allowed - 63 watts, the priorities will be distributed by the PoE ports so that the lowest priority port will not receive power.
For example, administrators can prioritize QoS-based traffic to ensure smooth and consistent voice and video broadcasts without delay. IGMP Snooping optimizes the delivery of multimedia traffic to ensure a stable connection for applications such as IPTV.
Durable, Compact Metal Case, With Desk/Wall Mount to meet your needs in any environment with a fanless design.
Features / filters | |
LAN standard | 10 Gigabit Ethernet |
Number of LAN ports | 10x [1/10G (RJ45)] , 1x SFP (1,25G), |
Number of PoE ports | 8x [802.3af/at (1G)] |
10G support | No |
Auto MDI/MDI-X | Yes |
Auto-negotiation | Yes |
Basic switching RJ-45 Ethernet ports quantity | 9 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Certification | CE, FCC, RoHS |
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
DC input voltage | 53.5 |
Depth | 126 |
Fanless | Yes |
Fiber ethernet cabling technology | 1000BASE-X |
Fiber type | Single-mode |
Gigabit Ethernet (copper) ports quantity | 9 |
Heat dissipation | 266.42 |
Height | 26 |
Housing material | Metal |
IGMP snooping | Yes |
Input current | 1.31 |
LED indicators | Yes |
MAC address auto-aging supported | Yes |
MAC address auto-learning supported | Yes |
MAC address table | 4000 |
Manual | Yes |
Networking standards | IEEE 802.1p,IEEE 802.3af,IEEE 802.3at,IEEE 802.3x |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 50 |
Package depth | 240 |
Package height | 70 |
Package width | 315 |
Power consumption (max) | 78.13 |
Power consumption (typical) | 7.11 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet plus (PoE+) ports quantity | 8 |
Power supply included | No |
Product colour | Grey |
Quality of Service (QoS) support | Yes |
SFP module slots quantity | 1 |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Store-and-forward | Yes |
Switching capacity | 20 |
Total Power over Ethernet (PoE) budget | 63 |
Type of case | Metal |
Wall mountable | Yes |
Width | 209 |
Hardware features | |
Ports | 8 RJ45 10/100/1000 Mbps PoE ports 1 RJ45 10/100/1000 Mbps port 1 gigabit SFP slot |
Network cabling | 10BASE-T: UTP cat 3, 4 or 5 cable (up to 100m) EIA/TIA-568 100Ω STP cable (up to 100m) 100BASE-TX: UTP cat 5, or 5e cable (up to 100m) STP EIA/TIA-568 100Ω cable (up to 100m) 1000BASE-TX: UTP cat 5, 5e, 6 or higher cable (up to 100m) STP EIA/TIA-568 100Ω cable (up to 100m) 1000BASE-X MMF, SMF |
Fanless | Yes |
Physical security features | Yes |
Power supply | External power supply (output: 53.5 V DC / 1.31 A) |
Packet forwarding rate | 14.88 Mp/s |
PoE ports (RJ45) | Standard: Compliant with 802.3at/802.3af standards PoE Ports: Port 1- Port 8 Total PoE power: 63 W |
MAC Address Table | 4K |
Jumbo frames | 16 KB |
Switching capacity | 20 Gbps |
Dimensions (H x W x D) | 209 mm × 126 mm × 26 mm |
Max. power consumption | 7.11 W (220 V/50 Hz, no PoE connected) 78.13 W (220 V/50 Hz, with 63 W PoE connected) |
Amount of heat generated | 24.25 BTU/h (no PoE device connected) 266.42 BTU/h (63W PoE device connected) |
Software functions | |
Advanced features | Works with PoE devices compliant with IEEE 802.3af/at standards IEEE802.3x flow control 802.1p/DSCP QoS IGMP Snooping |
Transmission method | Store-And-Forward |
Other | |
Certificates | CE, FCC, RoHS |
Contents of the package | TL-SG1008P, Power adapter, Installation manual |
Work environment | Operating temperature: 0℃~40℃ (32℉~104℉) Storage temperature: -40℃~70℃ (-40℉~158℉) Operating humidity: 10%~90%, non-condensing Storage humidity: 5%~90%, non-condensing |
A PoE Switch acts as both a PSE switch and an access layer switch. Consider the following aspects when selecting a switch:
Physical port
PoE switch is connected to PoE PD devices as an access layer switch, consider the number of PD devices to determine the number of PoE switch interfaces. Also consider the transmission rate of the end devices according to the data type, such as 11AC EAP should connect to Gigabit PoE switch.
PoE power standard
Depending on the PD devices (e.g., AP or IP camera) supported by the PoE protocol (e.g., 802.3af, 802.3at, or passive PoE), PoE switches should be kept compatible with the appropriate PoE power standard.
IGMP Snooping is an Internet Group Management Protocol (IGMP) traffic filtering protocol that provides a means to efficiently manage the flow of multicast packets so that they only go to the correct host location without overwhelming the entire network with traffic.