EN
TP-Link TL-SG2424 is a network switch equipped with 24 Gigabit RJ45 ports providing full data transfer speed, and 4 SFP combo slots. In addition, the switch has extensive network traffic security features, including support for VLAN 802.1Q, Port Security and Storm control to effectively protect the local network. The switch is managed from the command line and via a web browser, SNMP and RMON support allows convenient management of the device.
In order to enable simultaneous smooth transmission of data, voice and video, the switch is equipped with extended QoS functions. In order to ensure smooth data transmission, the administrator can set data transmission priorities based on port priority, 802.1P and DSCP protocols.
To increase the number of possible applications, TL-SG2424 switches are equipped with a number of second layer traffic management functions, including 802.1Q VLAN support, port isolation, port mirroring, STP/RSTP/MSTP, port aggregation and 802.3x flow control. In addition, the device is equipped with numerous maintenance functions, such as loop back connection detection, cable diagnostics and IGMP snooping. IGMP snooping allows for intelligent multicast streaming to specific subscribers only, and IGMP throttling and IGMP filtering effectively limits access to multicast for unauthorized users.
The TL-SG2424 Switch is an easy and intuitive device to use and manage. It offers many user-friendly management options, such as an intuitive Graphical User Interface (GUI) operated via a web browser and Command Line Interface (CLI). Support for SNMP (v1/2/3) and RMON protocols provides the ability to send out unforeseen event messages and monitor device status.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 24x [10/100/1000M (RJ45)] , 4x [1G (SFP)] , |
Number of PoE ports | No PoE ports |
Number of WAN ports | Not applicable |
Built-in modem | None |
Management | CLI - Command Line Interface, By web browser, |
Numbers of pieces in the package | 1-pack |
Switching layer | 2 |
Type of case | Desktop |
Equipment features | |
Standards and protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p |
Ports | 24 RJ45 ports 10/100/1000Mbps (Auto Negotiation/Auto MDI/MDIX) 4 SFP 100/1000Mbps combo slots |
Network cabling | 10BASE-T: Cat 3, 4 or 5 UTP cable (up to 100m) 100BASE-TX/1000Base-T: UTP cable cat 5, 5e, or higher (up to 100m) 100BASE-FX:MMF,SMF 1000BASE-X: MMF, SMF |
Fanless | Yes |
Power supply | 100~240VAC, 50/60Hz |
Power consumption | Maximal: 22.3W (220V/50Hz) |
Dimensions (S x G x W) | 440*180*44 mm (17.3*7.1*1.7 inches) |
Performance | |
Capacity | 48Gb/s |
Speed of packet redirection | 35.7Mp/s |
MAC address plate | 8k |
Package buffer | 10240 Bytes |
Jumbo frames | 10240 Bytes |
Software functions | |
Quality of Service function | 802.1p CoS/DSCP priority support Handling 4 priority queues The schedule of the queues: SP, WRR, SP+WRR Port/ data flow based transfer rate limitation Voice VLAN |
Features of the layer 2 switch | IGMP Snooping V1/V2/V3 Port aggregation - LACP (Up to 6 aggregation groups covering up to 4 ports each) STP/RSTP/MSTP BPDU filtering/protection TC/Root protection Loopback call detection Flow control 802.3x |
VLANs | Supports IEEE802.1Q protocol, up to 512 VLAN groups and 4096 VIDs |
Access control lists | Packet filtering based on source and destination MAC addresses (L2~L4) MAC address, IP address, TCP/UDP ports |
Transmission security | SSH v1/v2 SSL v2/v3/TLSv1 Port Security Broadcast/Multicast/Unknown-unicast Storm Control |
Management | GUI browser interface, CLI command line interface SNMP v1/v2c/v3, compatible with public MIBs and private MIBs of TP-LINK RMON (groups 1, 2, 3, 9) CPU monitoring Port Mirroring Automatic time setting: SNTP Firmware update: via web browser and TFTP Diagnostics: VCT test System logos, MIB public libraries |
Other | |
Certificates | CE, FCC, RoHS |
Package contents | TL-SG2424 Power Cable Installation instructions CD Assembly kit Rubber feet |
System requirements | Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux. |
Working environment | Permissible operating temperature: 0℃~40℃ (32℉~104℉); Permissible storage temperature: -40℃~70℃ (-40℉~158℉) Permissible air humidity: 10%~90%, non-condensing Permissible storage humidity: 5%~90%, non-condensing |