TL-SG3216 is a managed second layer switch equipped with 16 10/100/1000Mb/s ports. This TP-Link switch is a guarantee of high quality of work, support for advanced features such as QoS, threat protection strategies and network management functions in layer 2, traffic management, network protection against threats and much more. The switch is managed using an intuitive interface available through a web browser, CLI or using SNMP and RMON protocols. TL-SG3216 is the ideal solution for workgroups and branch offices requiring a cost-effective solution for gigabit transmission.
A secure network
JetStream 3 series switches have functions such as IP-MAC-Port-VID bindings, port protection, Storm Control, DHCP Snooping and IP Source Guard, which effectively protect our network against ARP attacks, broadcast storm etc. This allows us to define typical DoS attacks to be detected by our switch. This solution gives us a safer network than ever. Moreover, the switch uses 802.1X encryption combined with RADIUS server functions to authenticate users who want to access the network.
Quality of Service
The TL-SG3216 switch uses the advanced QoS service options to deliver better sound, data and video over the network. The administrator has the ability to prioritize network traffic, e.g. for individual IP addresses, MAC addresses, TCP or UDP ports etc. This ensures that audio and video transmission is smooth, clear and free from transmission delays.
L2 layer functions
The managed TL-SG3216 switch supports a variety of Layer 2 switch functions such as VLAN tagging (802.1Q), Port Mirroring, STP/RSTP/MSTP and LACP support, and data flow functions (802.3x). In addition, the switch supports advanced network security features such as feedback loop detection, cable diagnostics or IGMP Snooping. The IGMP snopping technique allows switching of multicast frames only for selected users, while the IGMP throttling & filtering function limits access to resources to individual users at port level.
TL-SG3216 is an easy to use and manage switch. The hardware can be managed in various ways, e.g. through an intuitive graphical user interface in a web browser (GUI) or a command line interface (CLI). Packet transfer can be protected by SSL or SSH encryption. The support of SNMP (1/2/3) and RMON protocols allows the switch to transmit important status information and to capture unexpected events.
16 RJ45 ports 10/100/1000Mbps Automatic negotiation of connection speeds and automatic crossover (Auto-MDI/MDIX) 2 Combo SFP 100/1000Mb/s* ports 1 console port
10BASE-T: Cat 3, 4 or 5 UTP cable (up to 100m) 100BASE-TX/1000Base-T: Cat 5, 5e or higher UTP cable up to 100m 100BASE-FX:MMF,SMF 1000BASE-X: MMF, SMF
Maximum: 14.7W (220V/50Hz)
Dimensions (S x G x W)
440*220*44 mm (17.3*8.7*1.7 inches)
Packet forwarding rate
MAC address table
Quality of Service function
Prioritization of CoS/DSCP traffic based on the IEEE 802.1p standard 4 queues Setting the queue of priorities: SP, WRR, SP+WRR Limitation of transmission depending on port, data flow Voice VLAN
Layer 2 switch features
IGMP Snooping V1/V2/V3 Support for LACP protocol (according to 802.3ad standard (up to 8 groups, 8 ports per group) Spanning Tree STP/RSTP/MSTP BPDU filtering/protection TC/Root Protect Feedback loop detection Data flow control (802.3x)
Support for IEEE802.1Q, up to 4096 VLAN and 4096 VLAN identifiers 802.1Q/MAC/Protocol VLAN GARP/GVRP
Access control lists
Packet filtering based on source and destination MAC addresses (L2～L4) MAC address, IP address, TCP/UDP ports, 802.1p standard, DSCP, VLAN ID Time Range Based
IP-MAC-Port-VID binding Authentication based on IEEE 802.1X standard (depending on port, MAC address), Radius, Guest VLAN Protection against DoS attacks Dynamic protection against ARP (DAI) attacks SSH v1/v2 SSL v2/v3/TLSv1 Port security Broadcast/Multicast/Unknown-unicast Storm Control
Dual IPv4/IPv6 stack Multicast Listener Discovery (MLD) Snooping IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6
GUI browser interface, CLI command line interface SNMP v1/v2c/v3, compatible with TP-LINK public and private MIB libraries Green TP-LINK technology RMON (groups 1, 2, 3, 9) Customer DHCP/BOOTP, DHCP Snooping, DHCP Option82 CPU monitoring Port Mirroring SNTP time synchronization Integrated MRL/NTDP protocol Firmware update: via TFTP protocol and web browser Diagnostics: VCT test System logos, MIB public libraries
CE, FCC, RoHS
The switch; Power cable; Quick Installation Guide; CD; Mounting elements; Rubber coasters
Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux.