EN
The TL-SL5428F switch for workgroups and departments provides a full range of management functions in Layer 2. The device allows you to set maximum throughput in the required place - for example, for workgroups on the edge of a network or as layers for grouping devices in enterprise networks. The powerful TP-Link switch is suitable for medium and large corporate networks where L2 management is required. The switch is equipped with 12 ports with speeds up to 1000 Mbps, so that other elements of the network, such as other switches, servers, disk drives and more, can be quickly connected. There are also four SFP ports that are connected to four RJ45 ports.
The TL-SG5412F manageable switch guarantees smooth switching of gigabit connections and a total switching capacity of 24Gb/s. It is equipped with 12 Gigabit SFP slots and 4 RJ45 combo ports. With its high switching capacity, the TL-SG5412F can significantly increase the throughput of your network.
Access control lists (ACL, L2 to L4) restrict access to sensitive network resources, excluding packets based on source and destination MAC addresses, IP addresses, TCP / UDP ports, and even VLAN identifiers. This operation is provided by the hardware and therefore switching performance will not be affected in any way. TL-SG5412F supports 802.1x authentication, which is used in conjunction with a RADIUS server to require specific credentials before allowing network access. In addition, the Guest VLAN feature allows access to certain network resources as well as clients other than 802.1x. In addition, the IP-MAC-Port-VID link, port security, overload protection, DHCP Snooping and IP Source Guard provide protection against network overload, ARP and DoS attacks etc. TL-SG5412F provides protection against typical DoS attacks. . You can defend yourself against these attacks much easier than before. The TL-SG5412F provides strong security for your network.
The TL-SG5412F uses Quality of Service (QoS) principles to integrate voice, data and video services into one network. The administrator can prioritize traffic in several ways, such as IP and MAC addresses, TCP or UDP port numbers, etc., to ensure that voice and video applications run smoothly and seamlessly at all times. In combination with VLAN support, voice applications will work much more efficiently. For other multimedia applications, such as IPTV, the TL-SG5412F offers advanced features for easy streaming management. IGMP Snooping ensures that the switch intelligently transmits the multicast stream only to the relevant subscribers, while IGMP Throttling & Filtering limits each subscriber to a port level to prevent unauthorized access to the multicast stream.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 12x [1G (SFP)] , 4x 10/100/1000BaseTX (RJ45), |
10G support | No |
AC input frequency | 50 - 60 |
AC input voltage | 100 - 240 |
Access Control List (ACL) | Yes |
Authentication method | 802.1X, Radius |
Auto MDI/MDI-X | Yes |
Bandwidth | 24 |
Basic switching RJ-45 Ethernet ports quantity | 4 |
Broadcast storm control | Yes |
Certification | CE, FCC |
Compatible operating systems | Windows 98SE, NT, 2000, XP, Vista, Windows 7 MAC OS NetWare UNIX Linux |
Connectivity technology | Wired |
Console port | RJ-45 |
Copper ethernet cabling technology | 1000BASE-T,100BASE-TX,10BASE-T |
Depth | 260 |
DHCP features | DHCP client |
Diagnostics | VCT |
Ethernet LAN | Yes |
Ethernet LAN data rates | 10,100,1000 |
ExpressCard slot | No |
Fiber ethernet cabling technology | 100BASE-FX |
Fiber optic connector | SFP |
Firmware upgradeable | Yes |
Flow control support | Yes |
Form factor | 1U |
Gigabit Ethernet (copper) ports quantity | 4 |
Height | 44 |
IGMP snooping | Yes |
Jumbo frames support | Yes |
LED indicators | Yes |
MAC address table | 8000 |
Management | CLI - Command Line Interface, By web browser, Yes, |
Management platform | SNMP, RMON, WEB/CLI/Telnet |
Management protocols | SNMP v1/v2c/v3 |
Maximum data transfer rate | 1 |
MIB support | Yes |
Multicast support | Yes |
Networking standards | IEEE 802.1D,IEEE 802.1p,IEEE 802.1Q,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | 0 - 40 |
Packet transfer speed | 17.99Mpps |
Port mirroring | Yes |
Power (W) | Without PoE |
Power over Ethernet (PoE) | No |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Rack mounting | Yes |
Rate limiting | Yes |
Security algorithms | SSH,SSL/TLS |
SFP module slots quantity | 12 |
SFP/SFP+ slots quantity | 12 |
Spanning tree protocol | Yes |
Static port security | Yes |
Storage relative humidity (H-H) | 5 - 90 |
Storage temperature (T-T) | -40 - 70 |
Supported data transfer rates | 10, 100,1000Mbps |
Switch layer | L2 |
Switch type | Managed |
Switching layer | 2 |
Type of case | Rack (1U), Desktop, |
User guide | Yes |
VLAN support | Yes |
Web-based management | Yes |
Wi-Fi | No |
Width | 440 |
Equipment features | |
Standards and protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p |
Ports | 12 SFP 1000Mbps slots 4 combo ports RJ45 10/100/1000Mb/s (Auto-negotiation/Auto MDI/MDIX) 1 console port |
Network cabling | 10BASE-T: Category 3, 4, 5 UTP cables (maximum 100m) 100BASE-TX/1000Base-T: Category 5, 5e or higher UTP cable (maximum 100m) 1000BASE-X: MMF, SMF |
Fanless | Yes |
Power supply | 100-240VAC, 50/60Hz |
Power consumption | Maximum: 15.2W (220V/50Hz) |
Dimensions (S x G x W) | 440*260*44 mm (17.32*10.2*1.73 inches) 19-inch rack-mounted enclosure, 1U height |
Mounting | 19" Rack |
Performance | |
Switching capacity | 24Gb/s |
Packet forwarding rate | 17.9Mp/s |
MAC address table | 8k |
Jumbo frames | 10KB |
Software functions | |
Quality of Service function | 802.1p CoS/DSCP priority support Handling 4 priority queues Planning queuing: SP, WRR, SP+WRR Port/ data flow based bandwidth restriction Voice VLAN |
VLANs | IEEE802.1Q support - up to 4K active VLAN and 4K VIDs 802.1Q/Protocol VLAN GARP/GVRP |
Access control lists | Packet filtering based on source and destination MAC addresses L2~L4 IP address, TCP/UDP ports, 802.1p, DSCP, protocol and VLAN ID Limited in time |
Transmission security | IP-MAC-Port-VID binding IEEE 802.1X authentication based on MAC, Radius, guest VLAN ports/addresses Protection against DoS attacks Dynamic control of the ARP table (DAI) SSH v1/v2 SSL v2/v3/TLSv1 Port Security function Broadcast/Multicast/Unknown-unicast Storm Control function |
Features of the L2 switch | IGMP Snooping V1/V2/V3 Aggregation 802.3ad LACP (Up to 8 aggregation groups, up to 8 ports in each group) Spanning Tree STP/RSTP/MSTP BPDU filtering/protection Function TC/Root Protect Loop back detection function Flow control 802.3x |
Management | Management via a graphical interface via a web browser and via the command line. Support for SNMP v1/v2c/v3, compatible with TP-LINK's public MIB and private MIB management databases. RMON (groups 1, 2, 3, 9) DHCP/BOOTP client, DHCP Snooping function, DHCP Option82 CPU monitoring Port Mirroring function Time synchronization: SNTP Integrated NDP/NTDP protocol support Firmware upgrade: via TFTP and Web connection System diagnostics: VCT test System logos and public MIBs |
Other | |
Certificates | CE, FCC, RoHS |
Package contents | Switch; power cable; quick installation instructions; CD; mounting elements; rubber stands; console cable; micro-USB cable. |
System requirements | Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC® OS, NetWare®, UNIX® or Linux |
Working environment | Operating temperature: 0℃~40℃ (32℉~104℉); Storage temperature: -40℃~70℃ (-40℉~158℉) Operating humidity: 10%~90%, non-condensing Storage humidity: 5%~90%, non-condensing |
Instructions for configuring the operation | Download |