Equipped with our special INVICTUS™ chip to process over 2 million packets per second. The AirFiber®24HD base station is ideal for outdoor applications, PtP bridging and links that require maximum performance.
Equipped with the world's best unlicensed bandwidth performance at 15.9 bps/Hz, airFiber®24 HD supports dense modulation - up to 256QAM, which is required at high speeds - up to 2 Gbps.
AirFiber®24 HD is characterized by the strongest automatic compensation for attenuation - providing the best range up to 24 GHz among products in the 24 GHz band.
AirFiber®24 HD supports FDD (Frequency Division Duplexing) in full duplex mode with a 0.2 millisecond delay, resulting in increased performance for the link network.
AirFiber®24 HD operates on licensed 24 GHz frequencies worldwide. Users can deploy airFiber®24HD anywhere.
| Features / filters | |
| Antenna frequency | 24 GHz |
| Antenna gain | Above 30dBi |
| Device type | Radioline |
| Radio link distance | 20 km |
| Basic technical parameters | |
| Dimensions | 593 × 768 × 370 mm (23,35 × 30,24 × 14,57"). Does not include assembly. |
| Weight | 17.3 kg (38.14 lb). Includes assembly. |
| Operating frequency | 24.05 - 24.25 GHz |
| GPS | GPS clock synchronization |
| EIRP | ~33 dBm (FCC/IC), ~20 dBm (CE) |
| Frequency accuracy | ± 2.5 ppm without GPS synchronisation ± 0,2 ppm with GPS synchronisation |
| Channel Bandwidth | 100 MHz |
| Maximum energy consumption | < 50W |
| Power supply | 50 V, 1.2A PoE power supply (included) |
| Power supply method | Passive PoE (42-58VDC) |
| Certificates | CE, FCC, IC |
| Mounting kit | Included |
| Operating temperature | -40 to 55° C |
| TX reinforcement | 33 dBi |
| RX reinforcement | 40 dBi |
| Beam width | < 3,5° |
| Front to back signal ratio | 70 dB |
| Polarisation | Dual-Slant |
| Cross-polarisation insulation | > 28 dB |
| Data port | (1) 10/100/1000 Ethernet port |
| Configuration port | (1) 10/100 Ethernet port |
Radio link distance: 20 km
Maximum radio throughput: 2 Gb/s
Operating temperature: -40 to 55° C
