The airFiber X device together with the airFiber X antenna can be used as a high quality endpoint, point to point bridge (PtP) or network backhaul. AirFiber X supports an oblique polarity of ± 45° to increase noise immunity and use of SNR. Its compact design allows airFiber X to be mounted on Ubiquiti antenna without the need for additional tools.
AirFiber X antennas are designed to work seamlessly with airFiber X radio equipment.
Innovative design improves signal isolation, significantly reducing interference and providing excellent gain for multi-point networks with high throughput. The device operates in 5GHz frequency band and with 23dBi gain. The radiation characteristics guarantee the highest possible signal-to-noise ratio (SNR) and high resistance to interference from other devices. The airFiber antenna has been designed to provide high efficiency and reliable connection.
| Features / filters | |
| Antenna frequency | 5 GHz |
| Antenna type | Directional |
| Energy gain | 21dBi - 30dBi |
| Antenna gain level (max) | 23 |
| Application | Outdoor |
| Compatible products | AF-5X |
| Compatible with brand | Ubiquiti |
| Cross polarization isolation | >35 dB |
| Frequency band | 5 |
| Front-to-back ratio | 30 dB |
| Harmonized System (HS) code | 85177100 |
| Height | 378 |
| Horizontal beamwidth | 10° |
| Polarization | Double linear |
| Product colour | White |
| Quantity per pack | 1 |
| Vertical beamwidth | 10° |
| VSWR | 1.5:1 |
| Width | 378 |
| Basic technical parameters | |
| Dimensions | 378 × 378 × 290 mm |
| Weight | 3.4 kg |
| Frequency band | 5.1 - 5.9 GHz |
| Gain | 23 dBi |
| 45° Beamwidth | 10° (3 dB) |
| 45° Beamwidth | 10° (3 dB) |
| Front-to-back ratio | 30 dB |
| Maximum VSWR | 1.5:1 |
| Wind loading | 190 N @ 200 km/h |
| Wind survivability | 200 km/h |
| Polarization | Dual-Linear |
| Cross-pol isolation | 35 dB Min. |
| ETSI | EN 302 326 DN2 |
| Installation equipment | Universal pole mount, airFiber X radio mounting brackets and waterproof coaxial cable for connecting the radio |
1. Adjust the azimuth and aim the antenna toward the other end of the link:
a. Loosen the two Flange Nuts on the U-Bolt.
b. Rotate the antenna to point towards the other end of the link.
c. Tighten the two Flange Nuts.
2. The elevation angle may be adjusted ±15°. Adjust the elevation angle:
a. Loosen the four Hex Bolts on both sides of the antenna.
b. Pivot the antenna to the desired elevation.
c. Tighten the four Hex Bolts.
3. Once the link is optimized, lock the aim:
a. Tighten all bolts and nuts to approximately 25 N-m.
b. Fasten the two Hex Nuts to the U-Bolt to prevent the Flange Nuts from loosening
The frequency of the antenna: 5GHz
Profit: 23 dBi
