EN
Ubiquiti's airMAX sector antenna is a high-end device, perfectly suited for designing complex network architecture. Thanks to the use of modern technology, the airMAX 5G19-120 sector antennas allow to achieve optimal beam shape. Ubiquiti sector antennas provide efficiency and high energy gains.
Ubiquiti airMAX 5G19-120 sector antenna with dual polarity 2x2 MIMO, is a functional device, which uses innovative technological solutions. AirMAX 5G19-120 was designed to enable its seamless integration with RocketM radio (RocketM is sold separately). The pair of devices, RocketM together with the sector antenna airMAX creates a powerful base station.
Ubiquiti ensures high quality and solid performance of its products. Durable antenna casing and waterproof connectors, ensure long and satisfactory use. Sector antennas of the airMAX 5G19-120 line, thanks to their high technical parameters, allow great flexibility and convenience during network design. We encourage you to read the detailed specification of Ubiquiti's airMAX 5G-19-120 sector antennas.
Features / filters | |
Antenna frequency | 5 GHz |
Energy gain | 10dBi - 20dBi |
Antenna gain level (max) | 19.1 |
Antenna type | Sector, Sector antenna, |
Application | Outdoor |
Certification | EN 302 326 DN2 |
Compatible with brand | Ubiquiti |
Connector type | 2x RP-SMA |
Cross polarization isolation | >28 dB |
Depth | 135 |
Electric deviation | 2° |
Frequency band | 5.15 - 5.85 |
Harmonized System (HS) code | 85177100 |
Height | 73 |
Horizontal beam width | 123 |
Horizontal beam width (5 GHz) | 4 |
Horizontal beamwidth | 123° |
Mounting | Wall |
Polarization | Double linear, Dual polarization, |
Product colour | White |
Purpose | Outdoor |
Quantity per pack | 1 |
Vertical beam width | 123 |
Vertical beam width (5 GHz) | 2 |
Vertical beamwidth | 123° |
Voltage Standing Wave Ratio (VSWR) | 1.5:1 |
VSWR | 1.5:1 |
Weight | 5.9 |
Width | 700 |
Basic technical parameters | |
Dimensions (mm) | 700 × 135 × 73 |
Weight | 5.9 kg |
Frequency band | 5.15 - 5.85 GHz |
Gain | 18.6 - 19.1 dBi |
Horizontal radiation angle | 123° (6 dB) |
Vertical radiation angle | 123° (6 dB) |
Radiation angle of the electronics | 4° |
Electronics slope angle | 2° |
Max VSWR | 1.5:1 |
Wind resistance | 200 km/h |
Wind load | 137.9 N @ 200 km/h |
Polarisation | Horizontal and vertical (dual) |
Separation between polarization | 28 dB Min. |
ETSI | EN 302 326 DN2 |
Installation equipment | Pole bracket, RocketM mounting bracket, Waterproof coaxial cable included |
1. Connect the RF cables to ports marked as Chain 0 and Chain 1 on the Rocket.
2. Attach the device to the mount.
a. Adjust the latches on the back to match the four mounting holes
b. Slide it down until it locks in place.
3. Connect the rest of the antenna cables to their respective ports.
4. Slide the protective cover down until it locks in place.
5. Attach U-Brackets to the antenna:
a. Attach U-Bracket to the upper mounting brackets of the antenna using two nuts.
b. Attach the second U-Bracket to the lower mounting brackets of the antenna
6. Insert two screws to each U-Bracket.
7. Secure each U-Bracket using two screws, hand tighten only.
8. To mount the antenna on a pole, slide the pole bracket over each pair of holding screws and secure it using two nuts.
9. The antenna has an electrical tilt of 2°. To further adjust the tilt:
a. Loosen four screws on the U-Brackets and the two nuts on the top of the pole bracket.
b. Slide the antenna to a desired tilt.
c. Tighten every screw and nut to about 25 N-m.
Antenna frequency: 5 GHz
Connector type: 2x RP-SMA