EN
This antenna is designed to integrate seamlessly with RocketM radio, with which it can create a powerful omnidirectional base station with 360° coverage while maintaining high network performance. Ubiquiti AMO-2G13 omnidirectional antenna , thanks to its radiation characteristics allows to build a very efficient and relatively cheap base station.
Omni airMAX antennas provide 360° range, performance 2x2 MIMO in LOS (Line-of-Sight) or NLOS (Non-Line-of-Sight) applications.
The airMAX antennas have been designed with a robust mechanical casing for outdoor use.
Each Ubiquiti airmax omni antenna has a built-in Rocket holder, so no tools are needed to install the Rocket BaseStation. Pair your Rocket radio with the Omni airmax omni antenna to create a powerful multi-directional base. This combination gives network architects unparalleled flexibility and convenience.
Features / filters | |
Antenna frequency | 2.4 GHz |
Energy gain | 10dBi - 20dBi |
Antenna gain level (max) | 13 |
Antenna type | Omnidirectional, Sector antenna, |
Application | Outdoor |
Certification | EN 302 326 DN2 |
Compatible with brand | Ubiquiti |
Connector type | 2x RP-SMA |
Cross polarization isolation | >25 dB |
Depth | 122 |
Electric deviation | 2° |
Frequency band | 2.4 |
Harmonized System (HS) code | 85177100 |
Height | 105 |
Horizontal beam width (2.4 GHz) | 7 |
Horizontal beamwidth | 360° |
MIMO Type | 2x2 |
Mounting | Wall |
Polarization | Double linear, Dual polarization, |
Product colour | White |
Purpose | Outdoor |
Quantity per pack | 1 |
Vertical beam width (2.4 GHz) | 2 |
Voltage Standing Wave Ratio (VSWR) | 1.7:1 |
VSWR | 1.7:1 |
Weight | 2.4 |
Width | 1390 |
Basic technical parameters | |
Dimensions (mm) | 1390 × 122 × 105 |
Weight | 2.4 kg |
Frequency band | 2.35 - 2.55 GHz |
Profit | 13 dBi |
Radiation in the façade plane | 7° |
Maximum VSWR | 1.7:1 |
Tilt down | 2° |
Wind resistance | 200 km/h |
Wind load | 111.2 N @ 200 km/h |
Polarisation | Vertical and horizontal (dual) |
Inter-polarization separation | 25 dB min. |
ETSI | EN 302 326 DN2 |
Installation equipment | Pole bracket, mounting brackets for RocketM radio, waterproof cables for radio connection |
1. Connect the RF cables to the ports marked as Chain 0 and Chain 1.
2. Adjust the mounts on the back of the case with the mount and slide it down until it locks in place.
3. Connect the remaining cables to the ports on the antenna.
4. Insert four screws to the main mount of the antenna bracket.
5. Secure the antenna to the upper part of the pole.
a. Slide the pole bracket over each pair of holding screws.
b. Secure each clamp using two flanged nuts.
c. Tighten each nut to about 25 N-m