AirMaX Omni is an omnidirectional antenna with vertical and horizontal dual polarity (Carrier Class 2x2 Dual Polarity MIMO) with a gain of 13dBi, designed for the 5GHz band. The antenna is designed to integrate seamlessly with RocketM radio, with which it can create a powerful omnidirectional base station with 360° coverage while maintaining high network performance. Ubiquiti airMAX OMNI AMO-5G13, thanks to its omnidirectional radiation characteristics allows to build a very efficient and relatively cheap base station.
All Ubiquiti M-line products have implemented airView system providing advanced spectrum analysis functionality. Many methods of spectrum analysis allow the operator to identify noise signatures and plan the Internet network.
The AMO-5G13 antenna is characterized by signal emission in all directions with the same power. The product operates in the 5GHz frequency band and has a maximum gain level of 13dBi.
airMAX® Antennas have been designed for outdoor use and therefore have robust materials that are not threatened by harsh weather conditions.
Each airMAX® antenna has a Rocket™ handle, so we don't need any additional tools to mount it.
| Features / filters | |
| Antenna frequency | 5 GHz |
| Energy gain | 10dBi - 20dBi |
| Antenna gain level (max) | 13 |
| Antenna type | Omnidirectional, Sector antenna, |
| Application | Outdoor |
| Certification | EN 302 326 DN2 |
| Compatible with brand | Ubiquiti |
| Connector type | 2x RP-SMA |
| Cross polarization isolation | >25 dB |
| Depth | 90 |
| Electric deviation | 2° |
| Frequency band | 5 |
| Harmonized System (HS) code | 85177100 |
| Height | 65 |
| Horizontal beam width (5 GHz) | 7 |
| Horizontal beamwidth | 360° |
| MIMO Type | 2x2 |
| Mounting | Wall |
| Polarization | Double linear, Dual polarization, |
| Product colour | White |
| Purpose | Outdoor |
| Quantity per pack | 1 |
| Vertical beam width (5 GHz) | 2 |
| Voltage Standing Wave Ratio (VSWR) | 1.5:1 |
| VSWR | 1.5:1 |
| Weight | 820 |
| Width | 799 |
| Antenna characteristics | |
| Model | AMO-5G13 |
| Dimensions (mm) | 799 X 90 X 65 |
| Weight | 0.82 kg |
| Frequency band | 5.45 - 5.85 GHz |
| Gain | 13 dBi |
| Elevation beamwidth | 7° |
| Max VSWR | 1.5:1 |
| Downtilt | 2° |
| Wind resistance | 125 mph |
| Wind load | 12 lb @ 100 mph |
| Polarisation | Vertical and horizontal (dual) |
| Inter-polarization separation | 25 dB min. |
| ETSI | EN 302 326 DN2 |
| Mounting | Universal Pole Mount, RocketM Bracket, and Weatherproof RF Jumpers Included |
1. Attach the RF Cables to the connectors labeled Chain 0 and Chain 1 on the Rocket. 
2. Align the mounting tabs on the back of the Rocket with the Rocket mount, and slide the Rocket down to lock it into place.
3. Attach the other ends of the RF Cables to the RF connectors on the antenna.
4. Insert the four Carriage Bolts into the main mounting bracket of the antenna.
5. Attach the antenna to the top of the pole. (If the antenna is attached to a lower point on the pole, part of the signal will be blocked by the pole.)
a. Slide a Pole Clamp over each pair of Carriage Bolts.
b. Secure each Pole Clamp with two Serrated Flange Nuts.
c. Tighten all nuts to approximately 25 N-m (18 lb-ft).
Antenna frequency: 5 GHz
Connector type: 2x RP-SMA
