Ubiquiti AM-V2G-TI | Sector antenna | airMAX Titanium, 2GHz, 15-17dBi

CODE: AM-V2G-TI / EAN: 0810354021008

Ubiquiti AM-V2G-TI | Sector antenna | airMAX Titanium, 2GHz, 15-17dBi

CODE: AM-V2G-TI / EAN: 0810354021008
292,35 EUR without VAT (net)
AVAILABILITY:
Any customs costs and VAT are to be borne by the buyer in the country of receipt.
Antenna frequency: 2.4 GHz
Energy gain: 10dBi - 20dBi
Antenna connector type: RP-SMA
Antenna gain level (max): 17
Show more parameters
Subscribe to the NEWSLETTER and receive 5EUR* for shopping
Save
* Offer valid for orders from 45EUR |Regulation|

Promotions

New products

Discounts

ABOUT PRODUCT

Breakthrough design and high performance

Innovative airMAX sector antennas are characterized by robust construction and 2x2 performance, with double polarity. Ubiquiti antennas can work as an advanced PtMP network base station. AirMax Sector Titanium model is a continuation of the evolution of Ubiquiti antennas, the best sector antennas in its class. Advanced RF isolation and variable beam configuration make the AirMax Sector Titanium AM-V2G-TI 2GHz 15-17dBi the leader in sector antenna technology.

ubiquiti networks sector antenna

Reduced interference and higher gain

The airMAX sector antennas are highly interference-resistant and provide excellent gain and transmission performance for efficient multi-point networks.

ubiquiti airmax sector titanium

Isolation options and radio-beam variability

Ubiquiti antennas have the ability to adjust the beam width, increasing scalability. Universal airMAX Titanium Sector models are equipped with advanced signal isolation and beam width adjustment: 60°, 90° or 120°.

sector antenna

Rugged construction

AirMAX antennas are designed to be robust and weather-resistant for outdoor use.

ubiquiti amv2gti ubiquiti airmax sector

Plug and Play integration

The Titanium sector antenna has an integrated Rocket mounting bracket, which allows Rocket to be mounted without any tools. A specially designed protective cover helps protect Rocket from damage.

plug and play sector antenna

Installation of the airMAX Titanium Sector

SPECIFICATION

Features / filters
Antenna frequency 2.4 GHz
Energy gain 10dBi - 20dBi
Antenna connector type RP-SMA
Antenna gain level (max) 17
Antenna type Sector, Sector antenna,
Application Outdoor
Certification EN 302 326 DN2 CE, FCC, IC
Compatible with brand Ubiquiti
Connector gender Male
Connector type 2x RP-SMA
Cross polarization isolation >25 dB
Depth 372
Electric deviation
Frequency band 2.3 - 2.6
Front-to-back ratio 30 dB
Height 120
Horizontal beam width 120
Horizontal beam width (2.4 GHz) 4
Horizontal beamwidth 60°, 90°, 120°,
Mounting Wall
Polarization Double linear, Dual polarization,
Product colour White
Purpose Outdoor
Quantity per pack 1
Vertical beam width 60
Vertical beam width (2.4 GHz) 4
Voltage Standing Wave Ratio (VSWR) 1.5:1
VSWR 1.5:1
Weight 6.4
Width 773

Basic technical parameters
Dimensions 773 × 372 × 120 mm
Weight 6.40 kg
Frequency range 2.3 - 2.6 GHz
Beam width 60°/ 90°/ 120°
Gain 17 dBi @ 60°
16 dBi @ 90°
15 dBi @ 120°
Elevation Beamwidth
Electrical Downtilt
Wind resistance 200 km/h
Wind load 640.5 [email protected] 200 km/h
Polarisation Linear Dual
Separation between polarization 25 dB
F/B ratio 30 dB
Standing Wave Voltage Ratio (VSRW) 1.5:1
Connections 2 x RP-SMA (waterproof)
Compatible radios RocketM2 Titanium
RocketM2
Mounting kit Pole bracket included
ETSI EN 302 326 DN2
Certificates CE, FCC, IC

SUPPORT

Quick start guide Download
Datasheet Download

FAQ

Installation of equipment

1. Set the desired beam width by adjusting the antenna. Loosen the four bolts with hex nuts to be able to move the antenna, but don't remove the bolts.



2. Carefully set the antenna to a desired beam width, according to the markings on the screws.



3. Tighten the four bolts.
4. Connect the RF cables to the sockets marked Chain 0 and Chain 1 on the Rocket.



5. Secure the Rocket to the mount.

a. Align the latches on the back of the Rocket with the four openings on the mount.

b. Slide the Rocket down until it locks in place.



6. Connect the RF cables to the antenna.



7. Slide the protective cover down until it locks in place on the mount.



8. Attach the U-Brackets to the antenna:

a. Secure the U-Bracket to the upper mounting brackets of the antenna using two nuts.

b. Secure the second U-Bracket to the lower mounting brackets of the antenna using two nuts.



9. Insert two carriage bolts to each pole bracket.



10. Secure each pole bracket to each U-Bracket using two bolts, tighten them only by hand.



11. To mount the antenna on the pole, slide the pole brackets over each pair of bolts, secure each bracket using two nuts.



12. The antenna has a 4° electrical downtilt, to furthe adjust the tilt:

a. Loosen four screws on the U-Brackets and two nuts on the upper bracket.

b. Adjust the antenna to have the desired tilt.

c. Tighten every bolt and nut to about 25 N-m (18 lb-ft) or less, to avoid deforming the pole.


Recommended products
292,35 EUR without VAT (net)
AVAILABILITY:
Any customs costs and VAT are to be borne by the buyer in the country of receipt.
Added to cart
-
+
PCS
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.