EN
The EdgeSwitch ES-24-250W is a 24-port switch. It has 24 gigabit RJ-45 ports, with 2 SFP ports. It is ideal for use in growing networks, providing robust performance and fast data transfer. EdgeSwitch® processes traffic on all ports simultaneously at line speed without packet loss. Total non-blocking throughput for 24-port models is up to 26 Gbps.
The EdgeSwitch series switches offer a rich set of advanced layer 2 switching functions and protocols, as well as layer 3 routing.
The EdgeSwitch series has ports for fiber optic communication. The 24-port models are equipped with two SFP ports providing throughput up to 1 Gbps.
EdgeSwitch is designed for convenient management, allowing administrators to configure and monitor switch functions in the graphical user interface. For advanced users, there is a standard command line interface (CLI), available via the console serial port, telnet and SSH.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 24x [10/100/1000M (RJ45)] |
Number of PoE ports | 24x [802.3af/at (1G)] |
10G support | No |
AC input frequency | 50/60 |
AC input voltage | 100 - 240 |
Access Control List (ACL) | Yes |
Authentication | Guest VLAN, Port-based authentication |
Authentication type | IEEE 802.1x,RADIUS |
Auto-sensing | Yes |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Broadcast storm control | Yes |
Certification | ETSI300-019-1.4 CE, FCC, IC |
Configuring Location Settings (CLI) | Yes |
Console port | RJ-45 |
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
Depth | 285.4 |
DHCP features | DHCP server,DHCP snooping |
Ethernet LAN data rates | 10,100,1000 |
Flow control support | Yes |
Form factor | 1U |
Forwarding rate | 38.69 |
Full duplex | Yes |
Gigabit Ethernet (copper) ports quantity | 24 |
Half duplex | Yes |
Harmonized System (HS) code | 85176990 |
Height | 43.7 |
IGMP snooping | Yes |
Installed SFP modules quantity | 2 |
Jumbo frames support | Yes |
LED indicators | Activity, Link, PoE, Speed |
Link aggregation | Yes |
MAC address filtering | Yes |
MAC address table | 16384 |
Management | CLI - Command Line Interface, By web browser, |
Management protocols | SNMP v1/v2/v3, Telnet |
Multicast support | Yes |
Networking standards | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z |
Number of queues | 8 |
Number of VLANs | 4093 |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -5 - 40 |
Port mirroring | Yes |
Power (W) | 250 |
Power consumption (max) | 250 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) power per port | 34.2 |
Power over Ethernet (PoE) type supported | Active PoE,Passive PoE |
Power supply included | Yes |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Rack mounting | Yes |
Security algorithms | SSH-1.5,SSH-2,SSL/TLS |
Spanning tree protocol | Yes |
Static route | Yes |
Switch layer | L2/L3 |
Switch type | Managed |
Switching capacity | 52 |
Switching layer | 3, 2, |
System event log | Yes |
Type of case | Rack (1U), Desktop, |
Virtual LAN features | Private VLAN,Tagged VLAN,Voice VLAN |
VLAN support | Yes |
Web-based management | Yes |
Weight | 4.7 |
Width | 485 |
Basic technical parameters | |
Dimensions | 485 × 43,7 × 285,4 mm (19,09 × 1,72 × 11,24 inches) |
Weight | 4.7 kg (10.4 lb) |
Total transmission speed without line blocking | 26 Gbps |
Max. energy consumption | 250 W |
Power supply method | 100-240 V AC/50-60 Hz Universal input |
Power supply | AC/DC, internal, 250 W DC |
Network Interfaces | (24) 10/100/1000 Mbps RJ45 Ethernet ports (2) 1 Gb/s Ethernet SFP ports |
Management interface | (1) RJ45 serial port Ethernet input/output band |
Mounting in a rack cabinet | Yes, 1U height |
ESD/EMP protection | Air ± 24 kV, contact ± 24 kV |
Shocks and vibrations | ETSI300-019-1.4 standard |
Operating temperature | -5°C to 40°C |
Operating humidity | 5% to 95% |
Certificates | CE, FCC, IC |
PoE to port | |
PoE interfaces | POE+ IEEE 802.3af/at (pins 1, 2+; 3, 6-) 24 V DC passive PoE (pins 4, 5+; 7, 8-) |
Maximum PoE+ power per port via PSE | 34.2 W |
802.3at mode voltage range | 50-57V |
Maximum passive PoE power per port | 17W |
24 V passive voltage range PoE | 20-27 V |
EdgeSwitch is set to DHCP by default, so it will try to get an IP address automatically. If this fails, it will use the default backup IP address 192.168.1.2
You must use one of the following methods:
- Configure the DHCP server to give a specific IP address to the EdgeSwitch based on the MAC address.
- Allow the EdgeSwitch to obtain an IP address and check the DHCP server. See which IP address has been assigned.
1. Start your web browser. Enter the appropriate IP address in the address field. Press Enter.
2. The login screen will appear. Enter Ubnt in the username and password fields. Click Sign In.
3. The EdgeSwitch configuration interface will appear. If necessary, you can adjust additional settings.
More information about PoE configuration can be found in the EdgeSwitch documentation, which is available at www.ubnt.com/download/edgemax.
Operating temperature range of the device is from -5°C to 40°C
The device operates in 10/100/1000 Mb/s Gigabit Ethernet LAN standards.