EN
The LiteBeam 5AC Gen 2 directs the radio energy in a narrow beam band. When the focal length is set in one direction, the LiteBeam 5AC Gen 2 will block or filter the noise, so interference resistance is improved. This feature is of particular importance in areas filled with other radio signals.
LiteBeam® AC connects to a separate Wi-Fi for quick and easy configuration with a mobile device.
LiteBeam® AC has increased protection against electrostatic discharges and also provides a more robust mounting with separate azimuth and height adjustment.
airOS 8 offers advanced features including airMAX, ac protocol support, real-time RF analysis and a completely new design for enhanced functionality.
LiteBeam® AC can be freely set up in three axes, so installation only takes seconds and no special tools are needed. Installation on a pole requires only one screw.
Features / filters | |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | Dual Band (2.4GHz, 5GHz) |
Antenna gain | 21dBi - 30dBi |
Antenna gain level (max) | 23 |
Antenna type | External |
Antennas quantity | 1 |
Cabling technology | 10/100/1000Base-T(X) |
Connectivity technology | Wired & Wireless |
Depth | 272.5 |
Device type | Client device |
Ethernet LAN | Yes |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Ethernet LAN interface type | Gigabit Ethernet |
Frequency band | 5.15 - 5.875 |
Height | 271.9 |
LED indicators | LAN, Power |
Material | Polycarbonate (PC), SGCC |
Mounting type | Pole |
Networking standards | IEEE 802.11ac,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ac,IEEE 802.3u |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -40 - 70 |
Power consumption (max) | 7 |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) voltage | 24 |
Power source type | PoE |
Processor family | Atheros |
Processor manufacturer | Qualcomm |
Processor model | MIPS 74Kc |
Product colour | White |
Product type | Network bridge |
Rack mounting | No |
RAM capacity | 64 |
RAM memory | 64MB |
RAM type | DDR2 |
Reset button | Yes |
Sustainability certificates | RoHS |
Sustainability compliance | Yes |
Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
Type of device power supply | Passive PoE |
Weight | 800 |
Wi-Fi | Yes |
Wi-Fi band | Single-band (5 GHz) |
Width | 358 |
Basic technical parameters | |
Dimensions | 358 × 271,95 × 272,5 mm |
Weight without mount | 800 g (1.76 lb) |
Weight with mount | 980 g (2,16 lb) |
Power supply | 24 V, 0.3 A Gigabit PoE adapter (included) |
Maximum energy consumption | 7 W |
Power supply method | Passive PoE (pairs 4, 5+; 7, 8 return) |
Voltage range | 24 V ± 10% |
Gain | 23 dBi |
Network interface | (1) 10/100/1000 Ethernet port |
CPU specification | MIPS 74Kc |
Memory | 64 MB DDR2 |
LEDs | Power supply, Ethernet |
Channel size | PtP mode 10/20/30/40/50/60/80 MHz PtMP mode 10/20/30/40 MHz |
Characteristics of the housing | Headlamp (SGCC 0.6T), plastic |
Mounting kit | Pole mounting (supplied) |
Wind load | 275 N at 200 km/h |
Wind resistance | 200 km/h |
ESD/EMP protection | ± 24 kV contact/air |
Operating temperature | -40° to 70°C |
Operating humidity | 5% to 95% |
Certificates | CE, FCC, IC |
Frequency of operation (MHz) | 5150 - 5875 |
Radio Frequency (MHz) management | 2412 - 2472 |
This method is available for 15 minutes immediately after powering up the device. If necessary, you can turn on the power supply of LiteBeam AC again.
1. Download the UNMS application from the App Store (iOS) or
Google Play™ (Android).
2. Connect the Wi-Fi network to the LiteBeam AC device called: LBE-5AC-Gen2:
Note: make sure DHCP is enabled on your computer.Start the application.
3. Run the application.
4. Touch LiteBeam 5AC option on the connection screen.
5. Touch Connect on the login
6. Select your country and touch Done.
7. In the configuration section adjust the settings to your needs.
Dual Band frequency (2.4GHz, 5GHz)
Operating temperature -40° to 70°C