EN
NanoStation AC loco is another evolution of the cult CPE design that revolutionized the wireless ISP industry.
Each model includes a separate Wi-Fi radio, which enables quick and easy configuration using a mobile device.
NanoStations offer enhanced protection against electrostatic discharges.
airOS 8 software offers advanced features including airMAX ac protocol operation, real-time signal analysis and a completely new design for increased usability.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | 5 GHz |
Wireless network standards | IEEE 802.11ac |
5 GHz | Yes |
AC input voltage | 24 |
Antenna gain | 11dBi - 20dBi |
Antenna type | Internal |
Built-in processor | Yes |
Certification | CE, FCC, IC |
CPU frequency | 560 MHz |
Depth | 77.5 |
Device type | Client device |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Frequency band | 5.150 - 5.250, 5.250 - 5.350, 5.470 - 5.725, 5.725 - 5.850 |
Harmonized System (HS) code | 85176990 |
Height | 59.1 |
Horizontal beamwidth | 45° |
Input current | 0.5 |
Internal memory | 64 |
LED indicators | Network, Power, Signal strength |
Maximum data transfer rate | 1000 |
Maximum outdoor range | 10000 |
Modulation | 16-QAM,64-QAM,256-QAM,BPSK,QPSK |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 5 - 95 |
Operating system installed | AirOS |
Operating temperature (T-T) | -40 - 70 |
Placement | Ceiling |
Power over Ethernet (PoE) | Yes |
Product colour | White |
RAM memory | 64MB |
Throughput data rate | 450 |
Type of device power supply | Passive PoE |
Weight | 180 |
Width | 179 |
Basic technical parameters | |
Dimensions | 179 × 77,5 × 59,1 mm |
Weight | 180 g |
Processor | MIPS 74K |
DDR2 memory | 64 MB |
Antenna gain | 13 dBi |
Network interface | 10/100/1000 Mbps Ethernet port |
Power supply method | Passive PoE (pairs 4, 5+; 7, 8 return) |
Power supply | 24 V, 0.3A Gigabit PoE |
Maximum electricity consumption | 7W |
Range of supported voltage | 24 V ±10% |
ESD/EMP protection | ±24kV contact / air |
Operating temperature | -40 to 70° C |
Operating humidity | 5 to 95% |
1. Put the NanoStation in a desired place on a pole and insert a cable tie to the mounting hole
2. Adjust the front of the NanoStation to face the other end of the wireless link. Then tighten the cable tie around the pole.
3. Connect the Ethernet cable from the port in the NanoStation to a PoE-enabled port in a switch.
Frequency of operation: 5 GHz
Device power type: Passive PoE