![Ubiquiti LocoM5 | CPE | 5GHz, 1x RJ45 100Mb/s, 13dBi Ilość portów LAN1x [10/100M (RJ45)]](https://www.batna24.com/img2/500/565_2.webp?20989284221)
Ubiquiti Loco M5 is a compact wireless access point operating in the 5 GHz band, which is ideal for creating radio bridges. It is resistant to harsh weather conditions. Ubiquiti NanoStationLoco M5 has a PoE-powered LAN port. Installation of the device is easy, no special tools are needed.
Ubiquiti's airMAX® technology has already been proven in millions of applications worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol guarantees high scalability and bandwidth and low latency in unlicensed, multipoint networks.
The versatile technology of Ubiquiti's airOS® system enables an efficient, multi-point external network, providing wireless network, bridge and routing configuration and network management services.
The Ubiquiti NanoStation Loco M5 access point has a PoE-powered LAN port. Its modern design, PoE power supply, very favorable isolation factor between polarizations and 15 kV surge protection for the radio track are features that prove its superiority over other devices of this type. The product can work in the following modes: Station, Station WDS and access point.
The airView software provides advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.
| Features / filters | |
| LAN standard | Fast Ethernet 10/100Mb/s |
| Number of LAN ports | 1x 10/100BaseTX (RJ45) |
| Operating frequency | 5 GHz |
| Antenna gain | 11dBi - 20dBi |
| Antenna gain level (max) | 13 |
| Antenna type | Internal |
| Cabling technology | 10/100Base-T(X) |
| Certification | FCC, IC, CE, RoHS |
| Connectivity technology | Wired & Wireless |
| CPU frequency | 400MHz |
| Depth | 31 |
| Device type | Client device |
| Ethernet LAN | Yes |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN data rates | 10,100 |
| Ethernet LAN interface type | Fast Ethernet |
| Flash memory | 8 |
| Frequency band | 5.17 - 5.875 |
| Harmonized System (HS) code | 85176990 |
| Height | 161 |
| Horizontal beamwidth | 45° |
| Material | Plastic |
| Maximum data transfer rate | 150 |
| Mounting type | Pole |
| Networking standards | IEEE 802.3,IEEE 802.3u |
| Operating relative humidity (H-H) | 5 - 95 |
| Operating temperature (T-T) | -30 - 75 |
| Power consumption (max) | 5.5 |
| Power over Ethernet (PoE) | Yes |
| Power over Ethernet (PoE) voltage | 24 |
| Processor family | Atheros |
| Processor frequency | 560 |
| Processor model | MIPS 74Kc |
| Product colour | White |
| Product type | Network bridge |
| RAM capacity | 64 |
| RAM memory | 32MB |
| RAM type | DDR2 |
| Type of device power supply | Passive PoE |
| Weight | 180 |
| Wi-Fi | Yes |
| Wi-Fi band | Single-band (5 GHz) |
| Width | 80 |
| Basic technical parameters | |
| Dimensions | 161 × 31 × 80 mm |
| Weight | 180 g |
| Power supply (PoE) | 24 V, 0.5 A |
| Maximum power consumption | 5,5 W |
| Power supply method | Passive PoE (pairs 4, 5+; 7, 8 return) |
| Frequency of operation | 5170-5875 MHz |
| Gain | 13 dBi |
| Network interface | (1) 10/100 Ethernet port |
| CPU specification | Atheros MIPS 74Kc, 560 MHz |
| Memory | 64 MB DDR2, 8 MB Flash |
| Frequency | 5 GHz |
| Cross-insulation | 20 dB minimum |
| Maximum VSWR | 1.4 : 1 |
| Beam width | 45° (H-pol)/ 45° (V-pol)/ 45° (height) |
| Polarisation | Dual line |
| Case | UV-stabilised plastic |
| Installation | On the post (mounting elements included) |
| Operating temperature | -30°C to 75°C |
| Operating humidity | 5% to 95% |
| Wireless approvals | FCC Part 15.247, IC RS210, CE |
| RoHS compliance | Yes |
| Shocks and vibrations | ETSI300-019-1.4 |
Connect the Ethernet cable from the device to the LAN port of the PoE.
2. Connect the Ethernet cable from the LAN to the LAN port of the PoE.
3. Connect the power cord to the power port.
4. Connect the other end of the power cord to a power outlet.
