EN
Ubiquiti's InnerFeed® technology integrates the radio with the antenna, so there is no need for cables to connect the radio to the antenna. This improves performance by eliminating cable failure.
airMAX® ac products offer reduced delay, improved noise resistance, scalability and significantly increased performance.
Ubiquiti's airMAX® software with a custom chipset significantly improves TDMA delay and network scalability. The custom processor provides hardware acceleration capabilities for the airMAX schedule to support high data rate and dense modulation used in airMAX ac technology.
PowerBeam® AC has the great gain due to its size. The excellent directionality of the PowerBeam AC signal provides the best performance in high noise environments.
Ubiquiti's airMAX® technology has been proven in millions of applications worldwide, demonstrating exceptional performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
Operating frequency | 5 GHz |
Antenna gain | 21dBi - 30dBi |
Antenna gain level (max) | 29 |
Certification | FCC, IC, CE |
CPU frequency | 720 MHz |
Device type | Client device |
Dimensions (WxDxH) | 620 x 620 x 386 |
Ethernet LAN (RJ-45) ports | 1 |
Frequency band | 5 |
Harmonized System (HS) code | 85176990 |
Internal memory | 136 |
LED indicators | LAN, Power, WLAN |
Maximum data transfer rate | 1000 |
Operating relative humidity (H-H) | 5 - 95 |
Operating temperature (T-T) | -40 - 70 |
Power consumption (typical) | 8.5 |
Power over Ethernet (PoE) | Yes |
RAM memory | 128MB |
Type of device power supply | Passive PoE |
Weight | 6.4 |
Basic technical parameters | |
Dimensions | 620 × 620 × 386 mm |
Weight | 6.4 kg |
Power supply | 24 V, 0.5A Gigabit PoE |
Maximum power consumption | 8,5W |
Power supply method | Passive PoE (pairs 4, 5+; 7, 8 return) |
Voltage range | 20-26VDC |
Operating frequency | 5150 - 5875 MHz |
Gain | 29 dBi |
Network interface | (1) 10/100/1000 Ethernet port |
CPU specification | Atheros MIPS 74Kc, 720 MHz |
Memory | 128 MB DDR2, 16 MB Flash |
LEDs | (1) Power supply, (1) LAN, (4) WLAN |
LEDs light output | Programmable, customizable to your own RSSI levels. |
Maximum VSWR | 1.6:1 |
Channel size | PtP mode 10/20/30/40/50/60/80 MHz PtMP mode 10/20/30/40 MHz |
Polarisation | Dual line |
Case | External UV-resistant plastic casing |
Installation | On the post (included) |
Wind load | 1510 N at 200 km/h |
Wind resistance | 200 km/h |
ESD/EMP protection | Air ± 24 kV, Contact ± 24 kV |
Operating temperature | -40 to 70° C |
Operating humidity | 5 to 95% |
Wireless approvals | FCC, IC, CE |
RoHS compliance | Yes |
Corrosion resistance test | 68-2-11 (ASTHMA B117), equivalent: MIL-STD-810 G Method 509.5 |
Vibration test | IEC 68-2-6 |
Temperature shock test | IEC 68-2-14 |
UV test | IEC 68-2-5 at 40° C, equivalent: ETS 300 019-1-4 |
Rain test | ETS 300 019-1-4, equivalent: MIL-STD-810 G Method 506.5 |
1. Connect the Ethernet cable to the PoE adapter.
2. Connect the Ethernet cable from the LAN network to the adapter.
3. Connect the power cable to the power socket and its other end to the mains socket.
Operating temperature: -40 to 70° C
Operating frequency 5GHz