EN
The Ubiquiti RocketDish RD-5G31 AC antenna is a high class device operating in the 5GHz frequency band and has an energy gain of 31dBi. Ubiquiti antenna easily integrates with RocketM radio, together with RD-5G31 AC antenna they create a powerful PtP 2x2 MIMO bridge with long range. For network designers it is a flexible and convenient solution.
The RocketDish ac antennas are characterized by high isolation and improved F/B and SNR ratio, which allows the use of higher-order modulation and the use of maximum data rate for example, 256QAM instead of 16QAM.
The improved F/B ratio and lower side bars significantly reduce interference, so the innovative RocketDish ac antennas provide excellent gain and beam performance for efficient multi-point networks.
RocketDish ac antennas are designed for durability for outdoor deployment.
RocketDish and Rocket devices are designed to be easy to install and work with any other Rocket device. Installation of the Ubiquiti RocketDish 5GHz 31dBi AC dual parabolic antenna does not require any additional components or resources.
Durable yet lightweight components are resistant to corrosion and are designed to withstand tough outdoor conditions. The enclosed cover helps to protect against weather conditions.
Features / filters | |
Antenna frequency | 5 GHz |
Antenna type | Directional |
Energy gain | >31 dBi |
Antenna gain level (max) | 31 |
Application | Outdoor |
Compatible with brand | Ubiquiti |
Cross polarization isolation | >35 dB |
Depth | 349 |
Diameter | 74.8 |
Frequency range | 5.1 - 5.8 |
Gain | 31 |
Height | 748 |
MIMO Type | 2x2 |
Polarization | Double linear |
Product colour | White |
VSWR | 1.4:1 |
Weight | 7.6 |
Width | 748 |
Basic technical parameters | |
Frequency band | 5.1 - 5.8 GHz |
Gain | 31 dB |
Maximum VSWR | 1.4:1 |
Dimensions | 748 × 748 × 349 mm |
Weight | 7.6 kg |
Wind resistance | 200 km/h |
Wind load | 1,028 N @ 200 km/h |
Polarisation | Horizontal and vertical (dual) |
Insulation between the polarization | 35 dB min |
ETSI | EN 302 326 DN2 |
Mounting | Universal pole bracket, mounting brackets for RocketM, waterproof coaxial cable included |
1. Connect the RF cables to the RocketM to sockets marked as Chain 0 and Chain 1.
2. Attach the RocketM to the antenna dish.
a. Align the latches on the back of the RocketM with the mount.
b. Slide the RocketM down to lock it in place.
3. Connect the RF cables to the antenna, Chain 1 to H and Chain 0 to V.
4. Attach the protective cover.
a. Align the mark on the top of the cover with the notch on the dish antenna.
b. Turn the protective cover clockwise until it locks in place.
5. The elevation rod has washers and nuts, unscrew one nut, one spring washer and one washer. Use them to secure the rod during assembly.
6. Attach the rod to the mounting bracket.
a. Insert the rod into the mounting bracket.
b. Secure the rod with a washer, spring washer and a nut.
7. Every M10x170 bolt has a nut, spring washer and a washer. Remove them and use them later in step 13.
8. Insert four M10x170 bolts the mounting bracket.
9. Each M10x25 bolt has a nut, spring washer and a washer. Remove them and use them to secure the bolts during assembly.
10. Attach the RocketDish to the mounting bracket.
a. Insert one M10x25 bolt to the RocketDish and the elevation rod.
b. Insert two M10x25 bolts to the RocketDish and the lower part of the mounting bracket.
c. Secure each M10x25 bolt using a nut, spring washer and a washer.
11. Each M10x100 bolt has a nut, spring washer and a washer. Remove them and use them to secure the bolts during assembly.
12. Attach the pole brackets to the pole just under the area where the RocketDish will be.
a. Place one pole bracket on each side of the pole.
b. Insert two M10x100 bolts to the pole brackets.
c. Secure each M10x100 bolt using a nut,, washer spring washer and locking washer.
d. Tighten the nuts to about 50 N-m
13. Secure the pole bracket to the pole just over the stabiliser brackets.
a. Move each pole bracket over each pair of M10x170 bolts.
b. Secure each M10x170 bolt using a nut, spring washer and a washer.
14. Visually adjust the azimuth and vertical tilt.
a. To adjust the azimuth, turn the RocketDish while it is supported by the stabiliser brackets.
b. To adjust the vertical tilt, tighten or loosen the nuts on the elevation rod so the RocketDish is at the desired tilt.
c. Tighten each nut to about 50 N-m