![Ubiquiti U6-LR | Access Point | UniFi 6 Long Range, WiFi 6, MU-MIMO, 1x RJ45 1000Mb/s Ilość portów LAN1x [10/100/1000M (RJ45)]](https://www.batna24.com/img2/500/330096_2.webp?20989284221)
UniFi 6 LR AP is a next-generation Wi-Fi 6 access point with a 4x4 MU-MIMO antenna specifically designed to extend the range of your wireless network. UniFi 6 Long Range Access Point solutions deliver their full potential in high traffic environments such as warehouses, hangars and stadiums. However, the range of the UniFi 6 Long Range Access Point is much wider and is suitable for deployment in offices, apartments and homes. The antennas of the UniFi 6 Long Range Access Point are tuned for situations where there is a need for better signal reception.
Featuring 4x4 MU-MIMO and OFDMA antennas in the 5 GHz band and 2x2 MIMO antennas in the 2.4 GHz band, the next generation UniFi 6 LR Access Point delivers a total wireless data transfer rate of up to 2.7 Gbps.
Support for the new Wi-Fi 6 standard allows to provide high quality services to more clients using the algorithms of the new 802.11ax standard. The device is several times more efficient than the classic UniFi 6 Lite access point, optimizing costs in open scenarios and reducing access point densification and switching costs. The omnidirectional antenna array is designed to provide increased RF coverage and is optimized for face-down ceiling mounting. The UniFi 6 Long Range Access Point software is centrally managed, configured and updated through the standard Ubiquiti UniFi Controller application, allowing maximum flexibility to apply necessary system modifications with minimal effort.
| Features / filters | |
| LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
| Maximum wireless transmission speed | 3000 Mb/s |
| Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
| Operating frequency | Dual Band (2.4GHz, 5GHz) |
| Wireless network standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, |
| 2.4 GHz | Yes |
| 5 GHz | Yes |
| AC input voltage | 44 - 57 |
| Antenna gain | Under 10dbi |
| Antenna gain level (max) | 5.5 |
| Antenna type | Integrated, Internal, |
| Built-in processor | Yes |
| Certification | CE, FCC, IC |
| Depth | 48 |
| Ethernet LAN (RJ-45) ports | 1 |
| Ethernet LAN data rates | 10,100,1000 |
| Harmonized System (HS) code | 85176990 |
| Height | 220 |
| Housing material | Plastic |
| International Protection (IP) code | IP54 |
| LED indicators | Yes |
| Maximum data transfer rate | 3000 |
| Maximum data transfer rate (2.4 GHz) | 600 |
| Maximum data transfer rate (5 GHz) | 2400 |
| MIMO | Yes |
| MIMO type | Multi User MIMO |
| MIMO Type | MU-MIMO 4x4 |
| Mounting kit | Yes |
| Number of products included | 1 |
| Number of users | 300 |
| Operating relative humidity (H-H) | 5 - 95 |
| Operating temperature (T-T) | -30 - 60 |
| Placement | Ceiling, Wall |
| Power consumption (max) | 16.5 |
| Power over Ethernet (PoE) | Yes |
| Processor frequency | 1.35 |
| Product colour | White |
| Quality of Service (QoS) support | Yes |
| Reset button | Yes |
| Security algorithms | WPA,WPA-Enterprise,WPA-PSK,WPA2,WPA3 |
| Supported network protocols | 802.11?x, 802.11?c, 802.11n, 802.11g, 802.11b, 802.11?, 802.3at, 802.1Q |
| Type of device power supply | Passive PoE, PoE 802.3af/at, |
| VLAN support | Yes |
| Weight | 930 |
| Width | 220 |
| Basic general data | |
| Manufacturer | Ubiquiti |
| Model | U6-LR |
| Type | Access point |
| Mechanical features | |
| Weight | Without mount: 800 g (1.76 lb) With mount: 930 g (2.05 lb) |
| Dimensions | Ø220 x 48 mm Ø8.66 x 1.89" |
| Enclosure material | Plastic |
| Mount material | SGCC steel |
| Weatherproofing | IP54 |
| Hardware features | |
| Processor specifications | Dual-core 1.35 GHz Cortex® A53 |
| Management interface | Ethernet Bluetooth Low Energy 5.0 |
| Memory Information (RAM) | 512 MB |
| Network interface | 1 x 1 Gbps Ethernet RJ45 (Gigabit Ethernet) |
| Button | Factory reset |
| LED | RGB |
| Power supply method | PoE , Passive PoE (48V) |
| Power supply | UniFi PoE Switch 48V, 0.5A PoE Adapter (not included) |
| Max. power consumption | 16.5W |
| Supported voltage range | 44 to 57VDC |
| Max. TX power | 2.4 GHz 26 dBm 5 GHz 26 dBm |
| MIMO | 2.4 GHz 4 x 4 5 GHz 4 x 4 |
| Mounting | Wall/ceiling (kits included) |
| Antenna gain | 2,4 GHz 4 dBi 5 GHz 5,5 dBi |
| Transmission speed | 2.4 GHz 600 Mbps 5 GHz 2400 Mbps |
| Operating humidity | 5 - 95% non-condensing |
| Operating temperature | -30 to 60° C -22 to 140° F |
| Certificates | CE, FCC, IC |
| Software | |
| Wi-Fi standards | 802.11a/b/g Wi-Fi 4/Wi-Fi 5/Wi-Fi 6 |
| Wireless network security | WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) |
| BSSID | 8 for each radio |
| VLAN | 802.1Q |
| Advanced QoS | Speed limitation for each user |
| Supported data transfer rates (Mbps) | |
| Support for simultaneous clients | 300 |
| Guest traffic isolation | Supported |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n (Wi-Fi 4) | 6.5 Mbps to 600 Mbps (MCS0 - MCS31, HT 20/40) |
| 802.11ac (Wi-Fi 5) | 6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80/160) |
| 802.11ax (Wi-Fi 6) | 7.3 Mbps to 2.4 Gbps (MCS0 - MCS11 NSS1/2/3/4, HE 20/40/80/160) |
For Ubiquiti U6-LR there are special covers that change the external appearance of wireless access points, which are sold separately.
