This is a GPON module from Ubiquiti with a CPE function.
| Features / filters | |
| Output connector | SC |
| SFP module - port speed | 1,25 Gbps |
| Transmission distance | 4-20km |
| Certification | CE, FCC, IC |
| Depth | 13.7 |
| Harmonized System (HS) code | 85369010 |
| Height | 11.3 |
| Input voltage | 3.3 |
| Interface type | SFP |
| Maximum data transfer rate | 2.488 |
| Maximum transfer distance | 20000 |
| Number of products included | 1 |
| Operating relative humidity (H-H) | 10 - 90 |
| Operating temperature (T-T) | -10 - 45 |
| Power consumption (typical) | 2 |
| Product colour | Black, Metallic |
| Rx power (max) | 8 |
| Rx power (min) | -28 |
| SFP transceiver type | Fiber optic |
| Tx power (max) | 5 |
| Tx power (min) | 1.5 |
| Weight | 30 |
| Width | 69.5 |
| Basic technical parameters: | |
| Product code | UF-INSTANT |
| Downstream | Up to 2.4 Gbps |
| Upstream | 1.2 Gbps |
| SFP 1 Gb/s interface | 1x |
| GPON WAN port, SC / APC | 1x |
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then select the fiber optic cable. Single mode fiber is usually used for longer distances, while multimode fiber is used for shorter distances.
The SFP RJ45 module allows you to connect Ethernet cables to SFP sockets in network devices via a special insert equipped with an RJ45 port.
