EN
Easy-to-read LEDs provide information about the status of: Ethernet connection, signal strength and power. The U Fiber Loco combines elegant design with a rugged, high-performance GPON CPE device, which is characterized by exceptionally low power consumption and two power options
The UFiber loco can be powered by a Micro-USB power supply (included) or 24 V passive PoE.
You can connect up to 128 devices to one GPON port. Supporting GPON links of up to 20 km, UFiber loco integrates with UFiber OLT, UFiber OLT 4 and other OLT devices.
Features / filters | |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45) |
PON standard | GPON |
Built-in processor | Yes |
Certification | CE, FCC, IC |
Data transfer rate | 2.488 |
Dimensions (WxDxH) | 76.5 x 76.5 x 26.4 |
Ethernet LAN (RJ-45) ports | 1 |
Ethernet LAN data rates | 10,100,1000 |
Harmonized System (HS) code | 85176990 |
Input current | 1 |
Input voltage | 24 |
LED indicators | Network, Power, Signal strength |
Memory and processor | MIPS32 |
Number of processors installed | 1 |
Numbers of pieces in the package | 1-pack |
Operating relative humidity (H-H) | 10 - 90 |
Operating temperature (T-T) | -10 - 45 |
Power consumption (typical) | 3.5 |
Power LED | Yes |
Power over Ethernet (PoE) | Yes |
Processor frequency | 240 |
Product colour | Black, Grey |
Reset button | Yes |
Weight | 77 |
Basic technical parameters | |
Dimensions | 76,5 × 76,5 × 76,5 × 26,4 mm |
Weight | 77 g |
Network Interfaces | (1) SC/APC, GPON WAN (1) RJ45, Ethernet LAN |
Speed network interface | (1) GPON WAN, ITU G.984, 2.488 Gbps download, 1.244 Gbps upload (1) GbE LAN, 10/100/1000 Mbps |
Management interface | Ethernet in the band PON |
Normal optical power range | TX (B+ class): 1.5-5 dBm. RX: -28 to -8 dBm |
Power supply method | Micro-USB: 5 V, 1A 24 V PoE passive (pins +4, 5; -7, 8) |
Power supply | Micro-USB Adapter: 5 V, 1A |
Maximum electricity consumption | 3,5W |
Range of supported voltages | 4.7 to 5.3 V |
CPU specification | MIPS-32, 240 MHz |
Memory | 128 MB DDR3 |
Button | (1) Reset |
Operating temperature | -10 to 45° C |
Working humidity | 10 to 90% |
Connect the optic fiber cable from the passive optical network to the PON port.
1. Connect the Ethernet cable to the LAN port.
2. If you want to use the micro-USB power supply, connect the other end of the Ethernet cable to the LAN network.
Work temperature: -10 to 45° C