![Ubiquiti US-16-XG | Switch | UniFi, 12x SFP+, 4x RJ45 10Gb/s, Managed Aggregation Switch Ilość portów LAN12x [10G (SFP+)]](https://www.batna24.com/img2/500/288946_1.webp?20989284221)
![Ubiquiti US-16-XG | Switch | UniFi, 12x SFP+, 4x RJ45 10Gb/s, Managed Aggregation Switch Ilość portów LAN4x [1/10G (RJ45)]](https://www.batna24.com/img2/500/288946_2.webp?20989284221)
Build and expand your network using the UniFi 16 XG Ubiquiti Networks switch, which is part of the UniFi Enterprise System. US-16-XG is a fully managed 16-port 10G fiber-optic switch that increases network capacity with multiple switches in your network.
The ability to switch traffic US-16-XG allows traffic to be handled simultaneously on all ports at the maximum possible speed without any loss. Total capacity without blocking up to 160 Gbps.
A single instance of a cloud-based UniFi controller can manage multiple UniFi sites within a centralized interface. Each site is logically separated and has its own network monitoring, configuration, maps, statistics and administrative accounts.
US-16-XG offers maximum performance and low latency as an aggregation switch. It is equipped with 12 SFP+ ports to provide fiber optic connectivity. For CAT 6/5e cable connections, US-16-XG offers four 10G RJ45 ports.
The UniFi switch integrates seamlessly into the network platform defined by the UniFi software, creating a highly scalable, comprehensive system of network devices in multiple locations that are controlled from a single interface.
| Features / filters | |
| LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
| Number of LAN ports | 12x [10G (SFP+)] , 4x [1/10G (RJ45)] , |
| 10G support | Yes |
| AC input frequency | 50 - 60 |
| AC input voltage | 100 - 240 |
| Basic switching RJ-45 Ethernet ports quantity | 4 |
| Basic switching RJ-45 Ethernet ports type | 10G Ethernet (100/1000/10000) |
| Broadcast storm control | Yes |
| Cable types supported | Cat6 |
| Cables included | AC |
| Certification | CE, FCC, IC, ETSI300-019-1.4 |
| Console port | RJ-45 |
| Depth | 221 |
| Form factor | 1U |
| Full duplex | Yes |
| Harmonized System (HS) code | 85176990 |
| Height | 43 |
| Housing material | Steel |
| Input voltage | 25 - 16 |
| Jumbo frames support | Yes |
| LED indicators | Yes |
| Link aggregation | Yes |
| Management | CLI - Command Line Interface, Dedicated application, |
| Mounting brackets included | Yes |
| Networking standards | IEEE 802.1x |
| Number of fans | 2 |
| Operating relative humidity (H-H) | 5 - 95 |
| Operating temperature (T-T) | -5 - 40 |
| Package type | Box |
| Packet forwarding rate (1 Gbps) | 238.1 |
| Port mirroring | Yes |
| Power (W) | Without PoE |
| Power connector | DC-in jack |
| Power consumption (max) | 56 |
| Power consumption (typical) | 36 |
| Power supply included | Yes |
| Product colour | Grey |
| Quick start guide | Yes |
| Rack mounting | Yes |
| Reset button | Yes |
| Screws included | Yes |
| Security algorithms | 802.1x RADIUS |
| SFP+ module slots quantity | 12 |
| Spanning tree protocol | Yes |
| Switch layer | L2 |
| Switch type | Managed |
| Switching capacity | 320 |
| Switching layer | 2 |
| Type of case | Rack (1U), Desktop, |
| VLAN support | Yes |
| Weight | 2.62 |
| Width | 443 |
| Basic technical parameters | |
| Dimensions | 443 × 221 × 43 mm |
| Weight | 2.67 kg |
| Total capacity without blocking | 160 Gbps |
| Maximum DC supply | 36W (does not include SFP/SFP+ modules) |
| Power supply method | AC 100-240VAC/50-60 Hz, universal input DC 48VDC/24VDC |
| Power supply | AC/DC, internal, 56W DC |
| Voltage range supported | 100 to 240VAC 57 to 20VDC |
| Certificates | CE, FCC, IC |
| Installation in a rack | Yes, 1U High |
| ESD/EMP protection | Air ± 24 kV, Contact_ ± 24 kV |
| Operating temperature | -5 to 40° C |
| Working humidity | 5 to 95% |
| Shocks and vibrations | ETSI300-019-1.4 |
| LEDs per port | SFP+ Data Ports - Speed/connection/activity RJ45 Data ports - Speed/connection/activity |
| Network Interfaces | (12) 1/10 Gbps SFP+ Ethernet Ports (4) 1/10 Gbps Ethernet ports RJ45 Ethernet Ports |
1. Usuń zaślepkę ochronną pokrywającą port SFP+.
2. Podłącz zgodny moduł światłowodowy do portu SFP+.
3. Podłącz kabel światłowodowy do modułu światłowodowego. Następnie podłącz drugi koniec kabla do innego urządzenia światłowodowego.
4. Powtórz kroki 1-3, aby podłączyć dodatkowe porty SFP+.
Operating temperature: -5 to 40° C
Total capacity without blocking: 160 Gbps
