The PSU is designed to supply power to electrical devices that require 230V AC voltage from 12V DC batteries. Series S has a solid and elegant casing and an additional direct input for solar panels and a priority switch for the solar / mains operating modes. The power supply can be used as an emergency power source for devices that require continuous power supply, such as furnaces and CO pumps.
The toroidal transformer used in the construction of the power supply compensates for different reactive power of the receivers, thanks to which capacitive, inductive and resistive loads can be combined. In addition, the inverter flexibly reacts to overloads such as starting pumps, compressors and motors. The power supply can operate in UPS mode, which ensures continuous and trouble-free operation.
The main feature that distinguishes sinus inverters from the classic AC/DC converter is that the output voltage is generated in a sinusoidal alternating waveform, identical to that of the mains, which allows the equipment to be powered with electric motors and transformers.
| Features / filters | |
| Battery voltage in UPS | 48V |
| UPS power (VA) | 5000 |
| UPS - charging current | 15A |
| Voltage (V) / Power (W) | 48V / 5000W |
| Technical data | |
| Total power (momentary) | 5000 VA |
| Rated power (continuous) | 3500 W |
| Cooperation with solar panels | Yes (built-in solar regulator) |
| Solar controller | 60 A MPPT | ~ 72V 48 - 90 V |
| AVR voltage regulator | Yes. 140-275 VAC. |
| Charging current (mains) | 15 A |
| Charging voltage (mains) | 42.5V±0.5 - 58V±0.5 |
| Built-in battery | No |
| Battery voltage / -ów | 48 VDC |
| Cooling | radiators + fans |
| Operating temperature | 0-40 degrees C |
| Dimensions [mm] | 650x440x240 |
| Weight [Kg] | 30,5 |
| Permissible supply voltage range | Switching to battery power is done when the mains voltage is lower than 160 V (+- 5 V) or higher than 260 V (+- 5 V) |
| Supply voltage frequency | 45 Hz ~ 65 Hz |
| Output voltage range | Mains voltage regulator: 204 - 240 V, uninterruptible power supply UPS: 230 V (+- 3%) |
| UPS output voltage frequency | 50 Hz (+- 0.5 Hz) |
| Overload protection (battery power supply) | In the event of an overload of 110 % - 130 %, the power supply is disconnected after 30 seconds. If the overload is more than 130 %, the power supply shall be cut off immediately. |
| Overload protection (mains supply) | The device warns of overload until the fuses are tripped. |
| Permissible humidity | 10 % RH ~ 90 % RH |
This is Line-interactive
Yes, the power supply works with solar panels.
