EN
VOLT SINUS PRO UPS 5000W belonging to the SINUS PRO series of emergency power supplies with a high efficiency DC / AC pure sine wave inverter. In case of 230V mains or photovoltaic power failure the device switches into battery mode, which allows for further system operation and protects against data loss.
The distinctive feature of sine wave UPSs from the classic and simple AC/DC converters is that they produce at their output a pure sine wave AC voltage identical to that of the mains supply. The device offers pure sine wave DC/AC functions, UPS switchover functions, mains voltage stabiliser (AVR) and battery charger (rectifier) functions, as well as protection necessary for the power supply to work with solar controllers and photovoltaics. By using a color display you can monitor the most important parameters of the system. Presented VOLT SINUS PRO UPS 5000W belongs to the series of "line-interactive" type of power supplies.
Technical data | |
Rated power (continuous) | 3400 W |
Overload power (momentary) | 5000 VA |
Battery voltage(s) | 48 VDC |
Rectifier (charging current) | 10 A |
PV charging voltage | 13.8V±0.5V |
Solar controller | No |
Automatic mains voltage regulator - AVR | 140-275V |
Idle current (no load) | 0.3 A ≤ idle current ≤1.5 A |
Permissible supply voltage range | Switching to battery power occurs when the line voltage is less than 160 V (±5 V) or more than 260 V (±5 V) |
Supply voltage frequency | 45 Hz to ~65 Hz |
UPS output voltage frequency | 50 Hz (±0.5 Hz) |
Output voltage range | AVR mains voltage regulator: 204 - 240 V UPS uninterruptible power supply: 230 V (±3%) |
Overload protection (battery-powered) | In case of an overload of 110% - 130%, the power supply is disconnected after 30 seconds, if the overload is higher than 130%, the power supply is disconnected immediately |
Overload protection (mains supply) | The device warns of an overload until the fuses trip |
Permissible humidity | 10% RH to ~90% RH |
Permissible operating temperature range | 0°C to 40°C |
Dimensions | 540 mm x 330 mm x 130 mm |
Weight | 30 kg |
Manual (EN) | Download |
SINUS PRO series converters are designed for office and household applications, they should not be used together with specialist equipment, the failure of which could cause material losses or life threatening injuries (e.g. industrial devices or medical equipment).
Do not overload the device. Operation with a load greater than the shift load may damage the inverter.