EN

VOLT SINUS PRO UPS 500E 12V 5/10A | Power supply | 500W

CODE: VOLT SINUS PRO UPS 500E 12V / EAN: 5903111886349

VOLT SINUS PRO UPS 500E 12V 5/10A | Power supply | 500W

CODE: VOLT SINUS PRO UPS 500E 12V / EAN: 5903111886349
90,28 GBP without VAT (net)
Out of stock
Battery voltage in UPS: 12V
UPS power (VA): 500
UPS - charging current: 10A5A
Show more parameters

About product

The VOLT SINUS PRO UPS 500E emergency power supply with nominal power 500 is a line-interactive, offline model, the device is used to uninterruptedly power computers, servers and computer sets. In the event of a sudden 230VAC power outage, the device switches to battery mode , allowing for further uninterruptible operation of the system, protecting us from irretrievable data loss. The AVR automatic mains voltage regulator, battery charger and the SINUS clean inverter based on a toroidal transformer are all located in one housing with a colour display.

VOLT SINUS PRO UPS 500E

Device characteristics

  • The functions of DC/AC converter, UPS emergency power supply are included in one device and automatic battery charger
  • The toroidal transformer used in the inverter provides high efficiency and low idling current.
  • The device is much more energy efficient than older constructions using transformers with with E-cores
  • A fast 32-bit microprocessor ensures accurate and trouble-free operation
  • Intuitive and easy to use thanks to the colour LED display, which informs about the current status operation of the device (input and output voltage, battery status, charging, etc.)
  • The converter produces pure sine wave voltage at the output, which makes it possible to work with practically any kind of load
  • High-currentcharge of batteries (exact values in the table with technical specifications)
  • Ability to change the charging current with a button and switch off the charger
  • Speed switchover from mains to UPS mode for uninterrupted operation connected devices
  • Intelligent cooling fan control, depending on the actual device temperature and operating status of the inverter
  • Ac (mains) / SOLAR (battery)
priority switch

LCD DISPLAY

Specification

Features / filters
Battery voltage in UPS 12V
UPS power (VA) 500
UPS - charging current 10A, 5A,

Technical data
Total power (momentary) 500 VA
Rated power (continuous) 300 W
Cooperation with solar panels No
Solar controller None
AVR voltage regulator Yes. 140-275 VAC.
Charging current (mains) 5/10 A
Charging voltage (mains) 13.8V±0.5V
Built-in battery No
Battery voltage / -ów 12 VDC
Cooling radiators + fans
Operating temperature 0-40 degrees C
Dimensions [mm] 230x145x180
Weight [Kg] 5.1
Permissible supply voltage range Switching to battery power is done when the mains voltage is lower than 160 V (+- 5 V) or higher than 260 V (+- 5 V)
Supply voltage frequency 45 Hz ~ 65 Hz
Output voltage range Mains voltage regulator: 204 - 240 V, uninterruptible power supply UPS: 230 V (+- 3%)
UPS output voltage frequency 50 Hz (+- 0.5 Hz)
Overload protection (battery power supply) In the event of an overload of 110 % - 130 %, the power supply is disconnected after 30 seconds. If the overload is more than 130 %, the power supply shall be cut off immediately.
Overload protection (mains supply) The device warns of overload until the fuses are tripped.
Permissible humidity 10 % RH ~ 90 % RH

Support

Youtube:

Faq

90,28 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.