EN

WiBOX PA D4M5-20HVX | WiFi Antenna | 5GHz 4x4 MIMO, IP67, 20dBi

CODE: WIBOX PA D4M5-20HVX

WiBOX PA D4M5-20HVX | WiFi Antenna | 5GHz 4x4 MIMO, IP67, 20dBi

CODE: WIBOX PA D4M5-20HVX
94,77 GBP without VAT (net)
Out of stock
Antenna frequency: 5 GHz
Antenna type: Directional
Energy gain: 10dBi - 20dBi
Application: Outdoor
Show more parameters

About product

WiBOX PA D4M5-20HVX is a 3x3 / 4x4 MIMO panel antenna with H&V and X (oblique) polarization in which each radiation stream has a separate polarization. It operates at 5.1 - 5.9 GHz with 20 dBi gain in all polarizations. The antenna is designed for point-to-multipoint (PMP) and point-to-point (PTP) connections. The value of the gain allows to apply it to connections over medium distances. It can also work inside and outside (IP67). Wide band (5.1 - 5.9 GHz) allows to easily find the right operating frequency. It cooperates with WLAN 802.11n / ac systems. PA D4M5-20HVX can cooperate with Cisco, Aruba Networks, Huawei, Xirrus, MikroTik, Ubiquiti and other devices. The antenna is integrated with the highest quality WiBOX Extra Large enclosure system.

WiBOX Extra Large

The WiBOX Extra Large is a large and roomy enclosure that allows you to install many of the available radios. WiBOX enclosures are designed for outdoor use. Each of them is made of UV resistant plastic - ABS. Moreover, they are resistant to bad weather conditions such as rain, snow or high humidity. The operating temperature range is from -40 ° C to 80 ° C.

WiBOX Extra Large

Fixing on a mast or wall

The advanced WiMount mounting system allows for easy mounting of the antenna both on the mast and on the wall. It also allows to set appropriate angle of the antenna in two planes.

Pole mount and wall mount

Watertight construction

The WiBOX system is certified for water resistance IP67. WiBOX antennas are equipped with the highest quality waterproof RJ45 connector or with standard holes to allow installation of the Ethernet cable maintaining the declared waterproofness level.

Waterproof casing

Extensive network

WiBOX system can be used to build complex systems consisting of many antennas. For this purpose, four additional holes for other antenna connectors were used in the casing.

Expansion of the network

WiMount attachment

WiMount is designed to combine stability and attractive shape in one product. This aesthetic design is made of special glass fibre reinforced plastic, which retains its rigidity even in extreme weather conditions. The innovative shape and the use of the plastic instead of the metal holder ensure better performance and the absence of rust throughout the entire service life. WiMount allows the antenna to be aligned in two polarizations.

WiMount attachment

Designed for MikroTik

This product has been qualified for the Made For MicroTik program. Antennas and housings are compatible with MikroTik Routerboards and other devices that are to work with MT products. The reason why this product is certified is the large installation chamber, which gives the possibility to install almost every electronic device available on the market, which probably makes it the most useful product.

Antenna for MikroTik

Specification

Features / filters
Antenna frequency 5 GHz
Antenna type Directional
Energy gain 10dBi - 20dBi
Application Outdoor
Connector type RJ45, 4x SMA,
Front-to-back ratio 30 dB
Horizontal beamwidth 16°
IP Rating IP67
MIMO Type 4x4
Polarization Double polarization (horizontal and vertical)
Port-to-Port isolation >32 dB
Vertical beamwidth 16°
VSWR 1.7:1
94,77 GBP without VAT (net)
Out of stock
Print version
Session will expire in:
Seconds
You will be logged out after the session expires
Choose a different country or region to shop in the language that suits you
Our site uses cookies (so-called "cookies"). You can find more about these files, as well as about how we process your personal data, in our privacy policy.
You are on page for country / region:
English (EN)
Please select a different country or region to shop in a language that suits you.