Feel the freedom of music with Xiaomi Mi True Wireless Earphones! Convenient one-finger control guarantees quick access to your favorite songs, and the perfect ACC HD sound quality will make you experience music at the highest level. True wireless design. Noise reduction during conversations. Contact control. The highest quality of performance.
Mi True Wireless Earphones are completely wireless. No cables come out of the earphones, which gives a completely new impression of complete freedom when listening to music. Despite the small size of the headphones, they provide unbelievable sound.
Refeat the limitations of ordinary corded headphones. When someone calls you with a redmi note, for example, you just need to take out one handset to automatically switch to a single handset talk mode. You can even give one of the headphones to a friend to listen to music together.
7-millimeter neodymium magnet + titanium coil type speaker provides full, wide sound and naturally balanced frequency. Enable noise reduction mode to get a clearer sound.
Please move the voice assistant by pressing the headphones twice. Different voice assistant systems are supported. Thanks to ENC (environment noise cancellation) the voice assistant will have no problems hearing you, regardless of the environment.
Both headphones are equipped with high-sensitivity microphones that effectively eliminate background noise thanks to beamforming technology + ENC, so that the conversation is equally clear to all callers.
After the first paired with the device, the headphones automatically connect after being removed from the charging case. In case of disconnection, the connection will be established automatically within 30 minutes. After 30 minutes of inactivity, the headphones will go into sleep mode, but to reconnect them simply place them in your ears.
The headphone case has enough power to provide ten hours of playback. Charging for just ten minutes is enough for 70 minutes, and an hour of charging provides a full charge and enough power for two additional cycles. The case uses touch-magnet technology for charging with a hallotron battery. It is equipped with USB port type C. Take it with you to charge and listen to music all day long.
Enable the Bluetooth function of the Android or iOS device to establish a connection. They work with phones, tablets and computers.
Each weighs only 5.8 g and has been designed to fit the ear. Silicone earbuds (true wireless earbuds) reduce external noise while improving comfort and stability when wearing. What's more, the headphones are waterproof (IPX4), so you can use them without any worries during training. Customized case - One case for storing and charging the headphones. The case and headphones together weigh only 58 g. It provides convenient protection for your headphones and always keeps your headphones charged.
| Features / filters | |
| Communication type | Bluetooth |
| 2.5 mm connector | No |
| 3.5 mm connector | No |
| Accessories included in set | 3 sizes silicone eartips |
| Active Noise Cancellation (ANC) | No |
| Audio formats supported | AAC |
| Auto power off | Yes |
| Battery life | Up to 10 h (with charging case), Up to 3 h, |
| Battery life (max) | 10 |
| Battery recharge time | 1 |
| Bluetooth | Yes |
| Bluetooth profiles | A2DP,AVRCP,HFP,HSP |
| Bluetooth version | 4.2 |
| Cables included | USB Type-C |
| Charging case | Yes |
| Charging voltage | 5 |
| Colour | White |
| Connectivity technology | True Wireless Stereo (TWS) |
| Control type | Touch |
| Device type | Bluetooth headphones |
| Driver unit | 7 |
| Ear coupling | Intraaural |
| Headset type | Binaural |
| Impedance | 16 |
| International Protection (IP) code | IPX4 |
| IP Rating | IPX4 |
| Left earpiece weight | 5.8 |
| Magnet type | Neodymium |
| Microphone type | Built-in |
| Mobile operating systems supported | Android, iOS |
| Noise-canceling | Yes |
| Product colour | White |
| Product type | Headset |
| Protection features | Waterproof |
| Range | Up to 10 m |
| Rechargeable battery | Yes |
| Recommended usage | Calls/Music |
| Right earpiece weight | 5.8 |
| Transparency mode | No |
| True Wireless Stereo (TWS) technology | Yes |
| USB connectivity | Yes |
| USB connector | USB Type-C |
| User guide | Yes |
| Voice guidance | Yes |
| Wearing style | In-ear |
| Weight | 58 |
| Wireless range | 10 |
| Basic technical parameters | |
| Manufacturer | Xiaomi |
| Model | Mi True Wireless Earphones |
| Type of product | Wireless headphones |
| Manufacturer's code | TWSEJ01JY |
| Headphone type | Screening |
| Compatibility | Android iOS |
| Communication | True Wireless Bluetooth |
| Functions | Touch control Automatic switching on and pairing One handset can be used Support for AAC technology |
| Reach | up to 10 m |
| Connections | USB type C |
| Built-in microphone | Yes |
| Protocols | BLE/HFP/HSP/A2DP/AVRCP |
| Impedance | 16 Ω |
| Battery life | up to 3 h (autonomously) (at 80% volume) up to 10 h (with charger) (at 80% volume) |
| Charging time | up to 1 h |
| Input voltage | 5V/1.1A |
| Colour | White |
| Weight | 58 g with packaging 5.8 g one handset |
| Diaphragm diameter | 7 mm |
| Certificates | Q/WMSX 002-2016 |
| Additional information | High quality sound Portable and wireless design Safe and comfortable fit |
| Set | Headphones 3 pairs of silicone earbuds - wireless earbud (XS, S, L) Loading packaging USB cable type C Operating instructions |
1. Take my True Wireless Earphones out of the charging box.
When the earplugs are removed from the charging box, they will automatically switch on. Therefore, turn them off by holding the touch area for about 3 seconds until they blink red.
3. after you turn them off, you must turn them on again. To pair them, hold their touch areas at the same time for about 30 seconds. You will then see red and white blinks on both handsets. This means that two Mi True Wireless Earphones are in pairing mode. Now you have to put them back for 5 seconds in the charging box and take them out for pairing with your phone. If the pairing is successful, only the right Wireless Earphone will flash.
Now you need to pair Mi True Wireless Earphones with your phone. To do this, go to your phone's settings, enable "Bluetooth" and then search for "Mi True Wireless_Earphones" and connect to them.
Note: If necessary, enter 0000 as the pairing code.
The headphones have a waterproof class IPX4, while the charging box is not waterproof.
To reset the Xiaomi headphones, hold down the function button for about 15 seconds, the red and white LEDs will start flashing and then go out. This means that the reset has been successful.
Yes, both headphones have a separate microphone.
Yes, in terms of design, the Xiaomi headphones score very good. The earbuds are made of high quality plastic and appear durable and lightweight. They do not fall out of your ears easily, even during intense activity.
- Loading case
- Handset x2
- Silicone tips 3 pairs
- USB cable
- Operating instructions
● Charging the handset
Insert the headphones into the charger, they will automatically enter the state
charging.
● Charging the case
If the indicator blinks slowly, it means that the charger is still
is charging; if the indicator lights up, it means that the charger is in
fully charged.
Note: When you first start up, put the headphones into
charger and press the function key to activate it. It recommends .
charge the device before use
Handset:Led handset indicates charge level
batteries:
When the headphones are charged.
2. when the handset is removed from the charger and the ear.
The handset indicator lights up for 5 seconds, indicating that
The battery is fully charged; the handset indicator flashes,
indicating that the battery is discharged and needs to be recharged.
Shelf: With the charger cover closed, press
function key or open the charger cover:
The charger indicator lights up for 5 seconds, indicating that
The battery is fully charged.
2. the charge indicator flashes to indicate that the battery is
discharged and must be recharged.
Yes,
Connection to two devices
1 Insert the handset into the charger, press and hold the button
function for 2 seconds, use device A to search and
plug in the handset.
2. remove the handset connected to device A from the charger,
insert the other side of the handset into the charger, press and hold
function key for 2 seconds, use device B to
connect the handset, and then connect both handsets to
of different devices.
Note: Before using this function, clear the records
both handsets' calls.
Loss of connection
When the device turns off Bluetooth or goes beyond
with the wireless network coverage, the headphones will enter the mode
vigils. If the connection is not restored within 10
minutes, headphones go to sleep.
Reconnect
Open the charger (with headphones inside), headphones
will automatically re-connect to the previous device.
If there is no connection record or no Bluetooth device
cannot be successfully connected, headphones automatically
they go into standby mode.
1 Put the headphones in the charger.
2 Press and hold the function key for more than 10 seconds.
seconds, the indicator will turn on and then release the button.
The headphones will be restarted and the old recording
the connection will be cleared and put into relay mode
pairing.
1) Avoid dusty, damp or dirty
of the environment. Avoid magnetic fields. Use in such
The environment may cause a circuit failure.
Use the unit at temperatures between -10°C and
55°C and store its accessories at temperatures from -40°C
to 70°C. Extreme heat or cold can cause
damage to the device. At temperatures below 5°C,
the battery performance will deteriorate.
3. do not place the device in a location that is easy to
exposed to direct weather conditions.
sunlight, e.g. on the dashboard of a car or on
the windowsill.
Keep the unit away from strong devices with a strong
magnetic potential or electric fields, such as
microwave ovens and refrigerators.
