EN
The F600 ONU terminal is designed for FTTH. It provides stable IPTV support and fast Internet access, while still being compact and energy-efficient.
By using QoS in F600, it is possible to make services that require increased network capacity for multiple users at the same time operate smoothly.
The interaction of GPON and XG-PON1 technologies in a single network has become possible thanks to the WBF (Wavelength Block Filter), which provides the future ability to improve it with the F600 terminal.
Support for remote update (OMCI) via batch, and also loop detection and route checking makes the F600 terminal work in plug-and-play mode, without the need for additional configuration.
The GPON optical interface will enable fast access to the broadband Internet, while the Gigabit Ethernet and Fast Ethernet ports will allow the network to be separated into subsequent devices through a stable wired connection.
ZTE F600 will also help you save energy by detecting network traffic and will go into low power mode if it is reduced.
Features / filters | |
Number of LAN ports | 2x 10/100/1000BaseTX (RJ45), 2x 10/100BaseTX (RJ45), |
PON standard | GPON |
Interfaces | |
Optical port | 1 x GPON interface (SC / APC) |
Transmission range | 0-20 km |
Transmission speed | Download: 2,488 Gb/s Upload: 1,244 Gb/s |
LAN interface | 4 x Interface 10/100/1000Base-T, Half/full duplex mode, Automatic MDI/MDIX, Automatic negotiation |
Optical module | |
Wavelength | Download: 1480-1500 nm Transmission: 1290-1330 nm |
Sensitivity of signal reception | -28 dBm |
Optical output power | 0.5-5 dBm |
Physical parameters | |
Energy consumption | Up to 6W |
Dimensions | 180 x 38 x 127 mm |
Working conditions | Temperature: 0°C to 40°C Humidity: 5% to 95% |
Weight | 250 g |
Power supply | 12 V DC |
Installation | On the desk / On the wall |
Spare battery | 3 AH / 6 AH (optional) |
Main features | |
Supported services | Internet IPTV |
GPON | 8 x T-CONT 32 x GEM port |
VLAN | 802.1Q 802.1P 802.1ad |
MAC address plate | 1k |
Multicast | IGMP v1/v2 Snooping |
Multicast group per user port | 256 |
QoS | Classification of service flows based on physical port Type Ethernet Restriction of incoming data Output shaping |
Management | Local Web OMCI |
Gigabit Ethernet is a data rate standard that is supported by two gigabit Ethernet ports on the F600 GPON and can be 1000 Mb/s (1 Gb/s).
In the F600 device 2 RJ-45 connectors are standard Gigabit Ethernet, while another 2 operate at Fast Ethernet speed.