EN
Thanks to the use of GPON technology, F660 V3 provides broadband network access. It has components to manage network traffic with high performance to ensure smooth operation of VoIP services and HD video streaming.
The wireless network in F660 V3 is adapted to the 11n standard, which enables data transfer at speeds of up to 300 Mbps, making the network more easily accessible for more devices with its fast operation and without the use of cabling.
QoS applied in F660 V3 is used for services requiring a higher priority, such as IPTV and VoIP. The services will be able to operate with increased speed and stability.
Along with support for dual stack IPv4/IPv6 and DS-Lite in F660 V3, further network expansion will not be a problem. The VLAN support allows you to manage your network to provide additional security and isolate selected devices. The TR-069 standard improves remote management and supervision of the device status.
ZTE F660 V3 has many connectors, which makes it very versatile:
The batch configuration on the EMS side will make it unnecessary to additionally configure the ZTE F660 V3. The signal tracking support and performance monitoring will help you to quickly find the cause of network failures.
ZTE F660 V3 will also help you save energy by going into low power mode when it detects reduced network traffic.
Features / filters | |
Number of LAN ports | 1x 10/100/1000BaseTX (RJ45), 3x 10/100BaseTX (RJ45), |
PON standard | GPON |
USB port | 1x USB |
VoIP ports | 2x POTS |
Technical Specification | |
GPON standards | Standard: ITU-T G.984.x GPON Transmission speed: -Upload: 1.244 Gb/s in burst mode -Download: 2,488 Gb/s Wave length: -Transmission (Tx): 1310 nm -Receive (Rx): 1490 nm Optical output power: 0.5 to +5 dBm The sensitivity of the receiver: Over 28 dBm |
Wireless network | Frequency: 2.4 GHz IEEE 802.11b/g/n Security: 128 bit WEP, WPA/WPA2 (Wi-Fi Protected Access), WPS (Wi-Fi Protected Access) WMM (Wi-Fi Multi Media) Up to 4 Open/Hidden SSIDs Up to 128 users per 1 SSID |
Quality of Service (QoS) | Data flow restriction Assigning traffic sent to the VLAN according to the established Ethernet priorities Ethernet Prioritization based on DSCP values Input speed limit / output shaping SP / WRR / SP+WRR |
Hardware specification | WAN: 1 x SC/APC port for GPON LAN: -1 x RJ-45 port for Gigabit Ethernet interface -3 x RJ-45 ports for Fast Ethernet interfaces POTS (FXS): 2 x RJ-11 ports for VoIP USB: 1 x USB 2.0 host interface Wi-Fi: 802.11b/g/n (2x2) The battery: 1 x (return) RJ-45 port for UPS control device Buttons: -WLAN -WPS -Reset -Power LEDs: power, PON, LOS, ALARM, LAN 1-4, POTS 1-2, WLAN, WPS, USB, BATTERY |
Electrical characteristics | Input power: 12 V DC, 1.5 A Current consumption: Up to 11W |
Physical characteristics | Weight: 380 g Dimensions: 199 x 150 x 35 mm |
Environmental characteristics | Operating temperature: -5°C-45°C (23°F-113°F) Humidity: 5%-95% (non-condensing) |
Certificates | CE Wi-Fi FCC MEF |
Technical information about F660 | Download |
Gigabit Ethernet is a standard data rate that is supported by a F660 V3 GPON unit and can be up to 1000 Mb/s (1 Gb/s).
The F660 V3 network device has one Gigabit Ethernet RJ-45 port and another three operate at Fast Ethernet.