EN
The ZTE F660 subscriber terminal was designed as a FTTH gateway. It supports many L3 functions, which will allow to create a smart home network with "triple-play" services like: VoIP, IPTV and high-speed Internet access. Using them will become more enjoyable thanks to QoS support.
The ONT ZTE F660 terminal allows you to create a wireless WiFi network in the IEEE 802.11b/g/n standard, which will allow you to connect devices wirelessly and provide network access for more devices.
The ZTE F660 terminal allows for remote management and diagnostics via OMCI protocol, which will reduce operating costs and will not require additional configuration on the ONT side.
ZTE F660 is designed in a compact style and with the environment in mind. The ONT terminal is designed to be energy efficient and has the ability to operate in low power mode when an inactive link is detected.
ZTE F660 has ports that can be used in many ways:
The ZTE F660 network device has a GPON network port that will allow the network to operate at full speed via connected fiber optic cables and be distributed to subsequent network devices via the built-in 4 gigabit Ethernet ports.
Features / filters | |
Number of LAN ports | 4x 10/100/1000BaseTX (RJ45) |
PON standard | GPON |
USB port | 2x USB |
VoIP ports | 2x POTS |
Technical parameters | |
Interfaces | GPON: 1 x GPON interface (SC / APC) LAN: 4 x Gigabit Ethernet port, RJ-45 Phone: 2 x POTS Port, RJ-11 Wi-Fi: IEEE 802.11b/g/n (2.4 GHz) USB: 2 x USB 3.0 port UPS: RJ-45 port with possibility to connect a UPS |
GPON transmission speed | Download: 2.5 Gb/s Transmission: 1.25 Gb/s |
Wireless transmission speed | 300 Mb/s |
Physical parameters | |
Dimensions | 195 x 174 x 32 mm |
Power consumption | 8W |
Power supply | Input: 100-240 V AC, 50/60 Hz Output: 11 V DC, 2A |
Working conditions | Temperature: 0 to 40 Humidity: 5% to 95% (non-condensing) |
Weight | 550 g (with power supply) |
Yes, the UPS connector allows you to connect an emergency power supply to the terminal, which will keep the device working despite the loss of power supply.
Each gigabit Ethernet port in ZTE F660 supports data transfer rates up to 1 Gb/s.
Terminal ZTE F660 can be configured via a convenient interface in the GUI browser. The OMCI protocol will make it unnecessary to configure it manually after connecting to a fiber network.
ZTE F660 provides a wireless network in IEEE 802.11b/g/n standards, among which N provides a wireless transmission speed of 300 Mb/s.
Yes, the ZTE F660 subscriber terminal uses ports with a high data transfer capacity and uses services such as QoS (Quality of Service) so that demanding applications will work with high performance.