EN
Extralink CERES (switch extralink ceres ex3906 8x) is a 10-port PoE switch with 4 modes of operation: AI QoS, AI VLAN, AI Exten and smart power mode. The AI QoS mode is ideal for use in monitoring, ensuring smooth image quality by processing video data with highest priority.
The extralink switch has an AI VLAN mode, ports 1-8 are isolated from each other, which helps to effectively suppress public address storms and improves network performance.
In AI Extend mode, ports 1-8 can effectively transmit data and PoE power up to 250 meters, which is ideal for monitoring systems and when powering cameras or access points. In AI PoE mode, the switch automatically detects the operating status of the connected device when it detects that it is not working properly, automatically restarts the device.
Features / filters | |
LAN standard | Fast Ethernet 10/100Mb/s |
Number of LAN ports | 10x [10/100M (RJ45)] |
Number of PoE ports | 8x [802.3af/at (100M)] |
10G support | No |
Basic switching RJ-45 Ethernet ports quantity | 10 |
Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
Cable types supported | Cat5, Cat5e |
Certification | CE, FCC |
Cloud-managed | No |
Depth | 94 |
Form factor | 1U |
Height | 27 |
Housing material | Metal |
LED indicators | Link |
MAC address table | 4096 |
Management | No |
Networking standards | IEEE 802.3af,IEEE 802.3at,IEEE 802.3i,IEEE 802.3u,IEEE 802.3x |
Power (W) | 100, 96, |
Power connector | DC-in jack |
Power over Ethernet (PoE) | Yes |
Power over Ethernet (PoE) pass through | Yes |
Power over Ethernet (PoE) ports quantity | 8 |
Power over Ethernet (PoE) type supported | Active PoE |
Power source | DC |
Power supply included | Yes |
Product colour | Black |
Quality of Service (QoS) support | Yes |
Rack mounting | No |
Reset button | No |
Stackable | No |
Switch layer | L2 |
Switch type | Unmanaged |
Switching capacity | 1.2 |
Switching layer | 2 |
Temperature sensor | No |
Throughput | 2 |
Traffic classification | No |
Type of case | Desktop |
VLAN support | No |
Web-based management | No |
Weight | 500 |
Width | 184 |
Technical parameters: | |
Manufacturer's code | EX.3906 |
Number of ports | 8 ports 10/100 Mb/s, RJ45, PoE 2 ports 10/100 Mb/s, RJ45, without PoE power supply |
Data transfer rate | 100 Mb/s Full Duplex, 10 or 100 Mb/s Half Duplex |
Network protocols and standards | IEEE802.3i, IEEE802.3u, IEEE802.3x, IEEE802.3af, IEEE802.3at |
Performance | Throughput: 2 Gb/s Network latency (100 Mbps): 20 μs maximum (using 64-byte packet) |
Frame filtering and transmission speed | Maximum 148,800 pps |
LED lights | Power supply, LINK/ACT |
PoE power supply (pins) | 1/2 (+), 3/6 (-) |
Power | Max power output of a single port: 36 W Maximum power of the whole device: 96 W |
Dimensions | Size: 184 mm x 94 mm x 27 mm Weight: 0.5 kg |
Environmental features | Operating temperature: 0°~40°C Working humidity:: 10%~90%, non-condensing |
EMC | CEClassB, FCCPart15, ClassB, VCCIClassB, C-Tick |
The switch supports the IEEE 802.3af/at standard, which automatically detects and identifies IEEE 802.3af/at compliant PoE devices and provides power to them. You don't have to worry about damaging a device that doesn't need power through PoE because the switch will detect that the device is not 802.3af/at compliant and will not supply power to the device.
Camera power supply works up to 250 meters and monitors the operation of the devices in real time
The maximum output power of a single port is 36 W.