EN
Cambium Networks' ePMP product line sets the standard for high performance, scalability and reliability in harsh interference conditions - all at an attractive price. EPMP 3000 is a third generation access point (AP) that uses ePMP 2000's interference protection mechanisms, but it adds multiple user capabilities through MIMO (MU-MIMO) technology. EPMP 3000 is a MU-MIMO 4X4 access point that can double the bandwidth per sector in the same channel width, serving two clients at the same time. In addition, ePMP 3000 continues to work on interference filtering, introducing beamforming technology for uplinked antennas, dynamic interference filtering from adjacent channels, combined with stable system software of the device known from ePMP series. The ePMP 3000 AP system consists of ePMP 3000 AP, sector antenna 4X4, optional antenna for beamforming and end user stations with 25 dBi and 16 dBi gain. The ePMP 3000 system can boast high throughput of packet transmission, up to 1.2 Gb / s, and support for end user modules with peak throughput up to 600 Mb / s.
The band | |
Model / part number | The full table of models and part numbers can be found in the table below |
Frequency range | 4910-5980 MHz (exact frequencies permitted by local regulations) |
Channel width | 20 | 40 | 80 MHz |
Channel spacing | Configurable in 5 MHz steps |
Interface | |
MAC layer (Media Access Control) | Ownership of Cambium |
Physical layer | 4X4 MUMIMO / OFDM |
Ethernet interface | 100 / 1000BaseT, automatically negotiated speed, 802.3at compliant, Aux port SFP |
Supported power supply methods | 56 V PoE (included), standard 802.3at PoE or CMM5 power supply with 56 V and 5 pin to 7 pin adapter |
Protocols used | IPv4 / IPV6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping |
Network management | HTTPs, SNMPv2c, SSH |
VLAN | 802.1Q with priority 802.1p |
Performance | |
Number of customers per sector | Up to 120 |
ARQ | Yes |
Nominal reception sensitivity (w / FEC) at 20 MHz channel | MCS 0, -92 MCS 8 supported by Wi-Fi -68 |
Nominal reception sensitivity (w / FEC) at 40 MHz channel | MCS0, -89 MCS9, -64 |
Nominal reception sensitivity (w / FEC) at 80 MHz channel | MCS0, -86, MCS9 - 61 |
Modulation levels (adaptive) | MCS0 (BPSK) to MCS 9 (256 QAM 5/6) |
GPS synchronization | Yes, via internal GPS or Cambium Sync (the internal GPS receiver also includes an antenna ) |
QOS | Three-level (voice, high, low) with packet classification by DSCP, COS, VLAN ID, IP and MAC address |
DSO | Dynamic spectrum optimization. Possibility to change channels based on the detection of interference on the current channel |
Fast DFS | Changes to a free radar channel with an alternative background availability check |
Link | |
Antenna | Sectoral antenna available (C050910D301A) |
Transmission power range | 0 to +32 dBm (total, up to regional EIRP limit) (step2 dB) |
Physical Features | |
Sectoral antenna connection | 4 x 50 ohms, RP (reverse polarity) SMA |
Combination of beam-forming antenna | 2 x 50 ohms, RP (reverse polarity) SMA, DC (power antenna) |
GPS antenna connection | 1 x 50 ohms, RP (reverse polarity) SMA |
Surge suppression | Integrated 1 joule. C00000000L033A - Gigabit 56V surge suppressor is recommended for optimal surge protection |
leakage class | IP55 |
Temperature | From -30 ° C to + 55 ° C (from -22 ° F to + 131 ° F) |
Energy consumption | 25 W Maximum 1 |
Input voltage | 44 V to 59 V. |
Weight | 0.7 kg (1.5 lbs) without supports |
Dimensions (L x W x H) | 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 inch) without supports |
Other | |
Encryption | 128 bit AES (CCMP mode) |
Certified documents | |
FCC Identifier | Z8H-89FT0024** |
Industrial Certificate | 109W-0024** |
Available Device Versions | |
C058910A102A | ePMP 3000 5 GHz Access Point Radio (FCC) (US cord) |
C050910A104A | ePMP 3000 5 GHz Access Point Radio (IC) (Canada/US cord) |
C050910A203A | ePMP 3000 5 GHz Access Point Radio (EU) (EU cord) |
C050910A303A | ePMP 3000 5 GHz Access Point Radio (EU) (UK cord) |
C050910A001A | ePMP 3000 5 GHz Access Point Radio (ROW) (no cord) |
C050910A101A | ePMP 3000 5 GHz Access Point Radio (ROW) (US cord) |
C050910A201A | ePMP 3000 5 GHz Access Point Radio (ROW) (EU cord) |
C050910A301A | ePMP 3000 5 GHz Access Point Radio (ROW) (UK cord) |
C050910A401A | ePMP 3000 5 GHz Access Point Radio (ROW) (India cord) |
C050910A402A | ePMP 3000 5GHz Access Point Radio (India) (India Cord) |
C050910A501A | ePMP 3000 5 GHz Access Point Radio (ROW) (China cord) |
C050910A601A | ePMP 3000 5 GHz Access Point Radio (ROW) (Brazil cord) |
C050910A701A | ePMP 3000 5 GHz Access Point Radio (ROW) (Argentina cord) |
C050910A801A | ePMP 3000 5 GHz Access Point Radio (ROW) (ANZ cord) |
C050910A901A | ePMP 3000 5 GHz Access Point Radio (ROW) (South Africa cord) |
C050910AZ01A | ePMP 3000 5 GHz Access Point Radio (ROW) (No PSU) |
C050910D301A | EPMP 4x4 MU-MIMO Sector Antenna (for ePMP3000AP) |
Brochure EN - ePMP 3000 | Download |
ePMP 3000 can connect up to 120 subscribers.
The new MU-MIMO 4X4 antenna will provide 90 degree coverage.
Yes, you will be able to use the intelligent antenna ePMP 2000 to work with ePMP 3000.
Cambium MU-MIMO 4X4 is the only antenna that Cambium currently recommends for cooperation with ePMP 3000.