Extralink EPON/ONU ORION - WAN port configuration

EPON ONU Extralink ORION WAN configuration

Extralink EPON/ONU ORION

WAN port configuration


FEATURES
  • 802.11n/b/g WiFi
  • four Gigabit Ethernet ports
  • one EPON port
  • two POTS ports
  • Fully compatible with 802.3ah
  • OAM and TRO69 for remote management
  • web interface for local management
  • IGMP Snooping
  • AES-128

Due to numerous queries about the configuration of the WAN port connection, below we describe how to correctly set the tip to have an Internet connection in several steps.


Default IP address: 192.168.100.1

Login: CUAdmin

Password: CUAdmin


First go to "Advanced Setup", go to "WAN" and click on "Add".

Select an interface type

Please choose the type of connection you want to configure on the WAN interface: PPPoE, IPoE and Bridging.

PPPoE

Set all the parameters needed to establish a session: Username, password, authentication methods, IGMP Multicast etc. and click "Next".

The next window appears "Routing - Default Gateway" - click "Next"

Save DNS servers and click "Next" again.

Click "Apply/Save" and you're done...

IPoE

The next configuration option is based on IPV4 and IPV6.

You can choose either DHCP:

or STATIC IP:

BRIDGING

The last option is Bridge mode. This is probably the simplest configuration option:

And that's done :)



Author:

Leszek Błaszczyk

Downloads

Downloads