DRON FPV BETAFPV PAVO PICO II PNP SBUS

Maximum performance in a compact PNP version

BETAFPV Pavo Pico II PNP SBUS is a lightweight FPV cinewhoop drone, designed as a compact platform for your own video system configuration. The 80 mm wheelbase combines the mobility of a micro drone with great expansion flexibility, making it ideal for freestyle flights and creating smooth close-range shots. The PNP / SBUS version weighs around 39.1 g without the battery and VTX module, allowing pilots to choose the image transmission system themselves according to their own requirements.

Rigid next-generation frame

The new Pavo Pico II frame has been redesigned for greater rigidity, simpler assembly and more convenient servicing during everyday use. The design uses guided mounting points, embedded nuts and a 4-screw mounting system, which makes assembly easier and helps maintain proper fitment of the components. The carbon plate has been prepared for the DJI O4 Air Unit and DJI O4 Air Unit Pro, allowing the platform to support various FPV configurations.

Ready base for DJI O4 and O4 Pro

The Pavo Pico II in the PNP version has been prepared for users who want to build their own FPV set with a chosen video transmission system. The frame and mounting plate allow the use of the DJI O4 Air Unit or DJI O4 Air Unit Pro, enabling the construction of a lightweight set with digital HD video transmission. The PNP version does not include a VTX module, so it gives you the option to tailor the configuration to your own needs.

F4 2–3S 20A AIO controller in SBUS version

The heart of the design is the F4 2–3S 20A AIO FC flight controller, designed to work with the digital HD VTX system. The board features an integrated 20A ESC, 9V 2A power for the HD VTX system and 5V 3A for external devices. The PNP / SBUS version has been prepared to work with the DJI SBUS protocol, making it intended for pilots using compatible DJI controllers. A dedicated 6-pin HD VTX connector makes it easier to install FPV system components.

LAVA 1102 drive and lightweight construction

The Pavo Pico II uses LAVA 1102 14000KV motors and Gemfan 45 mm 3-Blade propellers, creating a setup focused on strong thrust, quick response and efficient operation. The manufacturer indicates a 10% increase in power compared with the previous configuration, which translates into dynamic acceleration and good control during flight. Once equipped with the appropriate video system and battery, the drone can serve as a lightweight cinewhoop for FPV flights, freestyle and recording in small spaces.

VTX system installation

The set includes plates and mounting brackets for the O4 Air Unit and O4 Air Unit Pro, 5.8G VTX antennas, damping balls, washers and a complete set of screws. This equipment makes it easier to prepare the structure for a digital HD video system and reduces the need to select additional mounting components. The PNP version does not include a VTX module, so the user can choose the final video transmission system independently.

Package contents

The BETAFPV Pavo Pico II PNP SBUS set includes the mounting components needed to prepare your own FPV configuration with the DJI O4 Air Unit or DJI O4 Air Unit Pro system.

• 1 × BETAFPV Pavo Pico II Brushless Whoop Quadcopter — PNP version
• 1 × top plate for O4 Air Unit Bracket II
• 1 × bottom plate for O4 Air Unit Bracket II
• 1 × O4 Air Unit Pro Bracket mount
• 4 × GF 45 mm 3-Blade propellers
• 1 × Type-C to SH1.0 adapter
• 1 × SH1.0-4Pin adapter cable
• 6 × 6.6 mm damping balls for O4 Air Unit Pro Bracket
• 6 × 8.8 mm damping balls for O4 Air Unit Bracket II
• 6 × 1.5 mm damping pads for O4 Air Unit Bracket II
• 6 × M2×10 socket head cap screws
• 6 × M2×4 flat head hex screws
• 6 × M2×4 self-tapping hex screws
• 8 × M1.4×6 self-tapping Phillips pan head screws with washer
• 2 × 5.8G VTX antenna
• 1 × 5.8G VTX antenna mount
• 1 × Phillips screwdriver
• 1 × H1.5 hex screwdriver

Note: the PNP version does not include a VTX module in the set.

Technical specifications